Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

Window appears to have been forcibly removed shearing off the springs to the window balance. Balance body and shoe appear undamaged.The springs are marked as 6.5 x 35, and #7.5 x 35" respectively.I need the two sets of springs to repair this window balance.Please advise.James

need balances full assembled for double hung with the double coil. can you please let me know if there is a full assembled part number. part number on the balance says Part #801020

I would like to order several of these parts. Can you tell me the part numbers?Norm Thank you!

2002 double coil balancer

Milgard Style Line Single Hung window (36 wide x 60 tall) tilt-in lower sash. Balancer mechanism is twisted in frame and can't remove lower sash. Suspect balancer is damaged/twisted. Not sure what part(s) to replace and how to get window sash out

Part #801020 on white plastic #5.5 on coil 5232208 Can't see numbers on second coil Shoe 4,610,108 possible patent number

The coils have w6.5 35" and the other has a number 4 on it, it is a half inch wide. I will new coils,coil supports,pivot shoe and pivot bars if required.

Hi there. Emailing from UK. Can you help. I have UPVC sash windows. They've been in for around 15yrs. It appears the coil balance has snapped and distorted the other 2 coils (top sash had 3 coils on it). Also noticed the balance shoe on the other side is about to fail with screw just handing onto th ... (cont.)

Hi, I have a double hung window that will not stay open. I know I need new tilt latches and the whole new balance assembly including spring, shoe, and cover. I was hoping you could identify the parts that I need to buy. Also, if you could tell me where I could buy the parts, that would be amazing. A ... (cont.)

We need to order the correct parts. We need the left and right sides of the coil balance for one window from 2001.

I need these parts (Window lifts and tilt latches )These windows might be Weathershield or Marvin but I don't see a name. The build is 2000 per the label on side of the sash

I was told to contact Swisco for help finding these coil balances for my SImonton Window. Can you help?Thank you,Tom

My window is 33x36. Thank you for your help

I need to replace several broken springs in my windows. Info: Plastic piece 3 inches, screws 1 1/2 inches apart springs 1/2 inch two springs: one has a lable #5, other I could not find the size. windows double pane 31" wide and 32" height windows approx 22 pounds .

Good Morning! Attached are some pictures of the parts that were removed from a window at one of our properties. Can you help identify the replacement parts for this? Thanks Jamie

Im trying to find the spring balance assembly parts for a Simonton Window. Also had a questino on removing the plastic part at the top as itis onger than the cutout in the window frame.

Hi i would like to order 2 constant force window balance for the left and right side of the plastic window The weight of the window is 12.1 kg I need shoes and coils springs as well I suppose. Do i need to change anything else? The window has 2 brackets on each side which makes it difficult to ta ... (cont.)

This broken spring on the window I am trying repair does not have a calibration number. How do I select the correct one?

I have broken and bent springs on my balances for one window. I can reinstall the balances if I can get the springs. There were two 3.5lb and two 4.5lb springs. The springs say 35". I can't identify the assembly from the website if I need that. I also need the tilt latches for 1 window. ... (cont.)

Hi, thanks for reviewing, I need to identify the replacement parts for my windows. The constant spring on the right side has broken and I can't seem to figure out how to get the two plastic pieces that can contain the spring to move. I removed the lower spring, but the plastic piece does not slide. ... (cont.)