Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

So, inspected this MW window and is in need of balancers, pivot lock shoes, 1 tilt latch and possibly metal tilt pins, depending on your thoughts with the new shoe.I believe the balancer is S900-29 and -26 for upper and lower spiral balancer 26" and 29" x 3/8" tube, but sash seems light and tips are ... (cont.)

I miss placed the parts. Photos are what I have. Numbers you gave me are:S600-19 blue tip75-006 tool15-046 foot. Slot is approximately 1/2"Found the parts the foot is 1/2".

Screw mount for securing balance spring torn away. Shoe travels in 1 1/4 inch channel and is itself about 2 inches high. May also need new balance spring assembly. Thanks in advance for any help. One photo shows broken shoe and another the intact shoe opposite. If you know of service person availabl ... (cont.)

Please help me find the right part, pictures attached

Our windows are tilt-ins. The old balances (which look like S600's, have the same double-pin ends and go into a pivot shoe like the model 15-046) are 5/8" X 31", with green tips. Problem is, I can't find the green-tipped ones on your web site. I weighed the bottom window and it's 17.8 lbs. We are ... (cont.)

Hello, I'm in need of: (16) spiral balances(2) spiral balance pivot lock shoes(1) spiral balance toolSee enclosed pic. Can you help me identify the correct parts?Is there a discount on a large order like this?Thanks!Mike

i bought a new house, and two windows need a spiral balance mechanism replacement. One balance mechnisem is completely missing. I measured the length between the upper scerw and the bottom sash and it is 17'. the second window got broken mechanism. and by the same method of measurement it is 24.5' ... (cont.)

Good evening, Friend is moving into a new house, and there are 23 interior windows that have problems. I have some window latch springs that I was going to replace. But then, as I was taking the broken screens out of all the windows today, I realized some of the windows don't stay open, almost all ... (cont.)

16 inch tube with spiral mechanism and a plastic shoe. Tube has one top screw that connects to window channel frame. Plastic boot is partially broken in picture due to the screw rusting. The plastic boot screws into bottoms of the window frame. Window is removed by pushing to one side and lifting ot ... (cont.)

Balances are a tiny bit shorter than 27" long, 5/8 in diameter, and have a blue tip. The white exterior is plastic and there is a plastic sheath around the coil inside. Thank you so much.

I am trying to figure out which one I have it's a spiral balance but that tube that was around. It was plastic and or disintegrated and it looks like a white tip and it's 30 inches.

I have NAMI NRFC 100 3500 series windows. Looking for Pivot lock shoes and the tool that cranks back up the pistons that pull the window back up and holds it in place.ThanksJohn

Hello, My name is Brad and I'm having trouble finding parts for my no name window. I need pivot shoes. 2.16 x .534 x .976. Looks like the pivoting part is black or gray, and the rest is white. Thank you, Brad

My house was built in 1999 that has MW Twinseal Vinyl Double Hung Windows. MW Item#56546. The window balances are broke in one window. The picture in the window shows a number 5900SB. What is the part replacement that I need to replace both balances? Thank you, Dawn

just installed 2 new balances and the window only stays open about 10 inches what did i do wrong?

I need 29" balance spring assembly for 53x28 kinro single hung tilt in window. The original is 29" long and 1 1/8 diameter

We had 13 double hung Owens Corning fiberglass windows, model FDH, installed in 1995. The manufacturer no longer makes them and the installer is out of business. Some of the windows have become almost impossible to raise or lower. I removed one of the most sticky ones and took some photos. See below ... (cont.)

Windows are over 20 years old. Need replacement springs. Can you quote me replacements parts from these pix?

Our double hung with tilt windows will no longer remain open.

I would like to order two replacement parts for the window. Can you plhelp id the replacement part and provide a part #. Thank you if there are any replacement parts please call me