Viewing all customer Discussions for:

82-003 Sliding Door Handle Set, 3-15/16"

I just purchase a home with sliding door that has the above post pictures but the key won't work. Would Inbe able to find a replacement please?

I have 1965 Skyline Park Model..need new patido door handle w/lock for one inch thick door 3 15/16 hole spacing 82-003 or 82-306 is lock included, i don't understand what the "cutout in the pull" is. Installation guide will be needed...not computor savy if pictures are needed i'll get my brothe ... (cont.)

I have an Allen Stevens sliding door handle with dlock which needs replaced. The details of the handle are: Two screws with a 4Inch center 1 1/16 door thickness. Wooden handle on the outside Keyed

My lock no longer locks or closes.. I need a door handle with lock.. looks like there was small bar n it broke off.. this is original to mobile home 1990.. can you help

I need to find a patio door handle. Thank you

Casting is broken where handle is secured

We have not been able to find this door handle and lock to fit our patio door. The door is 1 inch in thickness and everything we have tried is too wide for the door. This door it's about 20 years old.

Hi! I need to replace the attached door handle, which I'm sure is older than I am. Any suggestions? Thanks! Bonnie

i bought the sliding door handle 82-003 to replace the one that broke on my sliding door that opens to the left. the handle i received seems as though it would work on my sliding door which opens to the right, but not on the door that opens to the left. i didn't see any R/L distinction when order ... (cont.)

I can't find a replacement anywhere for this door handle that has lock and key. Please help. I need it as soon as possible.

Need entire assembly with lock and handle. Thickness of door is 1- 1/32"3-7/8 center to center for installation holes.Looks just like this one shown in the images but needs a key lock too.

I need to replace this door handle and can't find anything like it.....any ideas????

I am trying to replace an old handle/lock on a sliding glass door on a Park Model mobile home. The screw distance is about 3 7/8" apart. The mortise is completely missing. We do need a keyed on the outside model.

This old hardware on old door (maybe from 1980s) broke off, and when I went to Home Depot and Lowes, the handles there looked comparable, but the bolt that secures door through handle wasn't long enough (as long as the one from original broken handle) to fit. It looked like maybe your Acorn door (?) ... (cont.)

Hello I just bought a home in Pennsylvania and one of my sliding glass door handles have a stripped screw for the thumb level and the locking mechanism does not sit properly inside the handle. I think that the (3 15/16 sliding glass door handle set is what I need? Also My other sliding glass door is ... (cont.)

I need to replace the handle on my sliding glass door. Thanks for your help Linda

Please help me get the correct handle lock set so I can lock my patio door. Thanks Swisco for your help. Sincerely, Denise C.

The casting broke from almost 4o years of use. The hole spacing is 4" between the mounting screws, Plus and Minus 2" from the latching lever. The wood door is 1 3/4" thick. Name inside casting is: SASH CONTROLS INC. DETROIT 20 MICH. 060-1255Thanks, Harold

I have an original 1963 slider door and the hardware recently snapped off. Attached are photos. I believe the correct replacement part is 82-003 after reviewing these posts but want to be sure. Can you help? Screw centers are at 3 15/16" and the door is 1.5" thick with no key. Thanks in advance for ... (cont.)

Hello. Does part 82-003 only fit 1 inch doors? My door is 1 3/8 or 1 1/4 inches thick. Thanks!