Viewing all customer Discussions for:

82-003 Sliding Door Handle Set, 3-15/16"

The casting broke from almost 4o years of use. The hole spacing is 4" between the mounting screws, Plus and Minus 2" from the latching lever. The wood door is 1 3/4" thick. Name inside casting is: SASH CONTROLS INC. DETROIT 20 MICH. 060-1255Thanks, Harold

I have an original 1963 slider door and the hardware recently snapped off. Attached are photos. I believe the correct replacement part is 82-003 after reviewing these posts but want to be sure. Can you help? Screw centers are at 3 15/16" and the door is 1.5" thick with no key. Thanks in advance for ... (cont.)

Hello. Does part 82-003 only fit 1 inch doors? My door is 1 3/8 or 1 1/4 inches thick. Thanks!

Good evening.I am reaching out to replace my patio sliding door handle with lock. The information on the part says Allen Stevens RD 1965. The holes are 3 15/16 inches a part and the door is approximately 1 1/2 inches wide. The door was installed in Burlington Township NJ in 1999. Please advise if ... (cont.)

This is an existing door where the locking hardware was missing. Handle measures approx 4" on center. Mfg label on door is not accessible. Appreciate any recommendations for retrofit hardware - thank you.

It's for a sliding door it's metal and wood and the lock is broken I sent a couple of pictures please reply to me as soon as you can thank you

Hi, I have a old sliding door with this lock and the previous owner lost the key. Is it possible to get this part or a whole new set up? Thanks, Debbie

What kind of handle and lock dose this keeper work with and do you think it would work with this door

Looking to replace my existing handle/lock assembly with a working one. I'd also like to add a mortise (i believe that is what the inner locking mechanism is called), as there is nothing as seen in the pictures. Not sure how old this is, but could be original to the house , 40+ years. Any help with ... (cont.)

I need a replacement for my sliding glass door, please.

Need replacement handle. Ty

hello, Im looking for a replacement for a general aluminum products door handle and lock as pictured. From what I was told general aluminum products manufactured the door but not the lock set.Regards,Anthony

I have an old DorWAL handle that broke. I'm looking to get a replacement. The ACORN SLIDING DOOR HANDLE SET, 3-1/2", product code 82-055 looks like it but it says the screw holes are 3.5" apart. The screw holes on my door handle appear to be 4" apart (see photo). Is there a larger size handle or sho ... (cont.)

Broken door handle

Will this door handle fit our type of sliding door with this type of lock opening? A mortise lock won't fit inside of the door.

Sliding glass door handle broken. Allen-Stevens Corp RD 1965. Patent number is blank.

Door 1 5/8

See photo of showing 3-15/16 with wooden handle that has a catch lock on the handle!! Need to get a replacement for the handle and the Lock keeper!!??

The screw hole at 4 inch on center. Latch hole is 1.5 inches long. The house was built in 1970 in Massachusetts

I need a replacement sliding door handle. The measurements between the screws is 3-15/16" the number on the metal spacer between the glass panels is A-1891 I think brand is Acorn but Im not sure.