Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

White tag attached

Lever is not working smoothly and doesn't always engage. There is a tiny spring on the mortise that appears to have broken at one end? Overall handle 7 1/4" h X 1 1/2"w Set screws center to center 5" Adjustment screws 1 11/16" center to center Mortise set screws 3 11/16" center to center Mortise ... (cont.)

ANSI Z97.1 2009 16 CFR 1201 11 SCCC 1921 1/8 CC-10-12/27/11 These are the numbers on my sliding glass door. The problem is the handle is broken, has never locked since I bought my house 7 years ago. The top screw of the handle has sheared off from the exterior handle plate, leaving a hole on t ... (cont.)

Looking for replacement latch for a Silverline door model 5700u I believe #82-218 is the one however would appreciate verification

I need a Swisco mortise lock? round face?3/16th Code# 82-218I also need slider slicker track lubricant..code#75-077Based on the photos are these the correct parts for my door?Thank you? Dawnel

I have a silver line slider door. ccl#440-h-046 22464892.1 344220

Looking to replace keyed lock cylinder? not sure of make

Need to replace the lock (original fell)- can you please tell me what to order? Handles are in good order just need the mortise locking mechanism.

I can't find this door handle anywhere can you help me please?

The lock on my sliding glass door got broken. I purchased another one and it is not fitting. The slot where the piece needs to slide into is squared and my slot is rounded at the corners. Information on the glass is AFG Glass 16 CFR 1201-CII ANSI Z97.1-2004 1/8UA SGCC 598 C5023

The lock on this door would not latch and was loose. I proceeded to remove and it slipped out of my grip and feel inside door. I need to order a new lock please. As you can see in the photos, I included a picture of the model number of this door. Can I please order a new lock?Thank you and God ... (cont.)

looking for a handle for my old 6 ft sliding glass door.... 1 inch thickness. 3 & 5/8 (3 1/2")screw holes...Needs to latch on inside, but don't have to have lock on outside....Handle is stamped PPG....doors were installed back in 70's....

Greetings..Id love to purchase a replacement locking mechanism if available ?

Hello, I have two IWC sliding doors and the locking mechanism's on both stopped working almost at the same time.

Urgent

I'm trying to find a replacement lock for a sliding glass door. The handle is ok, just need the lock. Attached is a photo of the stamp on the door and the lock placement. The screw holes are 3 ¾" apart and the opening is 3 ¼". Do you have anything that will work? I'm having a hard time finding the p ... (cont.)

I am trying to identify my lock and handle. The interior handle is overall 8 inches, 1 inch wide, with screw hole centers of approx. 4 inches. The outside handle is a about 6 1/8 inches. The mortice lock has screw hole centers of 3 1/2 inches. The exposed part of the mortice lock is 3 inches. Is th ... (cont.)

Looking for a replacement slider door handle. Just purchased a home and the slider door handle doesn't lock. Took it apart to find multiple holes that have been drilled into the door. The current handle doesn't cover all the holes that have been drilled into the door and the latching mechanism doesn ... (cont.)

Hi....handle metal broke and would like to replace the whole thing. Thanks!

Needing the lock and latch. We have no key for lock, but latch broke. Ali ADW-1 ASTM 2190-ARG