Viewing all customer Discussions for:

82-227 Mortise Lock, 5-3/8"

the lever and mortise lock from this early 1980's Weather Shield handle set were damaged and removed years ago. Looking for any option to reintroduce a lock to this door, whether replacement parts or new set. One thing that has me confused is the lack of screw holes above and below the mortise. Old ... (cont.)

1986 house built wood patio door. Lock mechanism screws in to wood cutout in door. I need all pieces.

Hi guys, I have an early 90s reflectolyte sliding door handle here that is bent and needs replacing. Bolts on front are 4 inches apart. Can you suggest a replacement handle and inside mechanism for this?

Our door does not have the locking part or hole. Not sure what is needed there. The latch on the works fine with the door handle, but has nothing to latch to.

Do you supply the mortise lock and bottom rollers that goes on this door. Your p/n 82-035 Patio Door Handle Set 3-15/16" was purchased and installed. The mortise lock mounting holes are 5 3/8" on center. Mortise lock face is 6 1/8" X 11/16"

Glass sliding door lock has PN 22650 - cant find Match on your website

HANDLE THAT GOES WITH 82-227 LOCK

I need this part replaced and cannot see it on the site! Which item can replace it.

I would love some help finding this part. I do work for a school district so it would be gladly appreciated if you can get back to me as soon as possible. Thank you for your time it is much appreciated. A rep showed me the 82-223, but I do notice a couple of differences, I think the one we have is ... (cont.)

I broke my handle on the outside glass sliding door, I am having a hard time locating a lock like the one in the photograph.

2265, 5125703, D340397. Stamped A Sash Controls Ferndale MI

I need to purchase a new handle, and i do not see dimensions online. Can you please let me know what handle will fit my door. The last one i purchased has screws that barely fit the thickness of the door.

Looking for replacement for a 32435 hook up align keeper

I need a complete set for my door and can not find it. I would like to get a key lock as well. The locking mechanism mounted to the door is bad as well. Thanks for your help.

Door handle IWC black

I'm looking to replace it with a key that can be lockable from outside.

Looking for the latching mechanism its marked as 2260 sash controls. the instruction sheet has 2262 on the top of the sheet. I think the latch spring has broken loose and the latch stays in the housing. Do you have a replacement part?

The door is wood and approx 1.25" thick. The only identifiable parts are the latch mech in the door labeled with Adams Rite Mfg, and the mortise plate with the pd logo. The inside thumb latch broke off the shaft that turns the latch. The internals are fine, just need handles that will work with th ... (cont.)

Purchased the 82-087 Legacy Keyed Handle set and the 82-227 Mortise Lock 5- 3/8". I installed the handle set and lock. I can lock the door on the inside but on the outside the key will not turn far enough to lock the door. However; if the door is locked on the inside I can unlock it from the outsid ... (cont.)

Here are 3 pictures of the handle/lock/mortise. I cannot find a brand but I think i need 82-310. Can you confirm? Thanks!!!