Viewing all customer Discussions for:

82-306 Keyed Exterior Sliding Door Pull

Also need rollers other misc parts.

4 15/16 centered, ovearll length 7 3/8, width 1 ". Has Peach Tree doors printed on inside. Appears to match your 82-005 and 82-306. I am confused do I buy 2 pieces or piece? My home was built in 1973 and that year is on the handle interior. Handle s sticking. I have taken it apart and it seems a lit ... (cont.)

Hello, I am trying to replace the lock assembly on a sliding glass door from a home built in 1972. I have attached some pictures of the lock and the door, some with a ruler to show dimensions, to help identify the assembly. Do you think you have a replacement that would work in this application? ... (cont.)

I have a sliding glass door to my patio that I would like to install a key lock into. I have looked at the local hardware store and could not find anything to fit. Below is a drawing of the holes that the current handle uses. The top and bottom holes are for the screws that hold the indoor and outdo ... (cont.)

I have a Wenco sliding glass door. I believe it is a JX7 but i am not sure. it also has a number 52692 stamped inside it. The track has gone south on me and so I am looking to buy one of the track caps, probably the fuller or one as opposed to the little round one. Now I also want to replace ... (cont.)

I have an interior glass sliding door with a wooden frame 1 5/8"thick with no previous hardware on it. I need to install a lock on it. Can you suggest a lock for it?

I am seeking help please to find a patio door handle with lock replacement kit (both inside and outside handles) and keeper for the attached photos. The handle/lock is on a 1989 Cobra Sentinal park model. The closed black keeper is 3-1/4 inches long and 3/4 inches wide. The length of the insid ... (cont.)

How do I decide which keyed lock I need for my sliding glass door: 82-303 or 82-310? The handle looks like your 82-306? Thanks John

Exterior and interior door pulls. Locking mechanism ok. Scott

Hello, I am looking into changing a standard interior-locking-only sliding door, to one where you can lock it with a key from the outside. (We have several apartment units that needed to be changed in this manner). From some of the QnA's I've read on this site it seems that you need to know wh ... (cont.)

aloha, just received a handle (82-009A) from you yesterday. I ordered it over a month or so back, and never received the part until yesterday. Unfortunately, it is NOT the handle assembly I needed. I need one just like the one I received, but WITH a lock that has a keyed entry, which I thought ... (cont.)

Please review the pictures and let me know if you have a replacement. I believe the center to center hole is 4 15/16 or 5" Thank you,

I have a glass sliding door that I would like to put an exterior lock on. Key lock on the outside, turn knob on the inside. The door is a Caradco brand door, part number cpdu1-60x68b. Caradco was bought out by Jeld-wen. I will have pictures to post a little later today. Any help would be apprecia ... (cont.)

I need two sliding door handle sets which I believe to be 82-033. The mortiss for the lock is 1 inch across and looks to be 3 15-16 high. Do you have code for the 1" wide mortiss that goes with the 82-033? Does the 82-033 come with the lever for the locking mechanism, or do you by separate? ... (cont.)

Our main door handle that is brown with 3 15-16 bolt spread needs to be replaced. If I get the keyed exterior sliding door pul 82-306, what is the component code for the interior door handle. Do I have to buy the kit for 82-033 or is their a separate product code just for the interior handle (3 15 ... (cont.)

Hi, I am trying to install an exterior lock to a patio sliding door. Is this possible and do you have a product that will work for us. Attached is a picture of the internal and external view. The existing lock mechanism is a clamp type from the inside. Thank you, Hamilton

My intention is to add a keyed lock to a sliding glass patio door. I removed the current handle/lock. The exterior handle says DOrWAL. The inside of the interior handle is stamped 120. My screw spacing is 3 15/16" and door thickness is 1.5" Can I just add a lock cylinder to the current hand ... (cont.)

I have four broken sliding door handles with 3 5/16 distance between bolts. Two Right Handed Handles (Brown) Two Left Handed Handles (Brown) They resemble 82-005 but the distance is 3 15/16 and not 4 15/16. I need one with keyed exterior handle. The three other exterior handles don ... (cont.)

I am trying to replace a handle on a sliding glass door. The exterior locking handle is broken and the locking mechanism shaft is broken to a nub. The interior handle locking mechanism is missing. I ordered the 82-306 but I need the corresponding indoor handle with latch

Do you have a part similar to 82-306 that is a clamp type pull ? I am trying to find a replacement handle for my patio door. Although a part like 82-306 works as a keyed lock, it sticks out too far too allow a screen to pass over easily. the original clamp type pull did not have this problem. Th ... (cont.)