Viewing all customer Discussions for:

82-310 Key Lock

mounting screws are 4-15/16" apart. Let me know if you need anything else. This is my summer place and I will be going back up there this weekend if you need any info. I did look for any markings or numbers and did not see any.

I'm trying to locate a replacement handle and lock. The handle mounting screws are 3-15/16" apart, door is 1-1/16 " Thick. The lock that goes into the door is 4-7/8" for screws to go in to the edge. Any help would be appreciated, thanks John

Hi there, Seems its time to replace the entire lock system on my old Anderson 3 pane sliding doors. Would you have these parts (pics attached) or something I can retrofit? Thank you very much. Best, Harvey

needing the keyed handle and rollers how ever many we need John

We ordered some parts from you (order 1015034) including the 82-310 key cylinder. Her house uses Kwikset keys so we were hoping that we could have the lock cylinder reset to her house key. She took both to a locksmith who said that the house key has to slip into the key cylinder in order for the r ... (cont.)

Hi, Can you help me determine what parts I need to convert our existing sliding glass door handle to keyed-handle? See attached pics. This is a Milgard sliding glass door that is ~18yrs old. Or do I need to completely replace the existing handle? If this is the case, can you recommend a goo ... (cont.)

Ok part number 82-263 looks exactly the same as in my pictures so I assume it will work? Will part number 82-020 Work with that mortise lock also? Also I want 82-306 to make it lock. Will all this work together and do you have a kit for all this? Thanks Alan

Hello, I am trying to determine which key cylinder is needed for my patio door. I have attached pictures. I cannot locate identifying marks or the manufacturer's name or part number. The inside and outside of the door handle is 7 inches from the top to the bottom. The inside metal latch is 5.25 inch ... (cont.)

I need to replace the handles and locking mechanism on a sliding glass door that is about a 1977 vintage. I have attached pictures for your viewing to match me to a new set of handles and lock. Thank you in advance for your assistance.

Wondering if you have a replacement for the attached photos, patio door handle and hardware. The handle is marked with a K K (see photo). The holes are 4 (or probably 3 15/16") on centers. Thank you.

Inside handle- 4" between screws, 7.5" long Outside handle- 7.25" long Punch hole- 5/8" Door width- between 1.25" and 1.5"

I am looking for a door lock for this sliding door. the hardware was made by sash controls inc PT 1963. the door is 1 3/8 thick, the knock out for the key is 5/8 . the depth of the handle is 1 1/14 deep. the distance between the mount screws is 3 15/16. I called and was told to send pictures to bett ... (cont.)

1 - 7/8 inch door. Center to Center on screw hole is 3 - 15/16 Need a replasement locking handle for my sliding door aprox 30 years old

I just want to make sure that this lock will fit the New Castle XT lock as I have to replace some. Thank you

Do you have the siding glass door lock assembly or just the lock cylinder only for this type of door lock? Just purchased the house and want to have the lock replace. Please let me know what else you need. Thanks

I need a cylinder lock too for a friend's Legance 3 Patio Door (Type DDSG; Code TRI - K - 36) Attached are photos of the lockset. Thanks

Would Part #82-310 lock cylinder fit a 200 series Andersen sliding vinyl patio door? The shape is a little different but the diameter is the same. Thanks, Jon

Im looking for a keyed door handle for this style of sliding door handle. Is it available and if not, any recommendations for repalcement parts? Product code: 82-082

I would like to put a keyed lick cylinder on the outside of my bf rich door. It is a 1000 series door, part # bfr-m-17-00042-00001. The door is made to be adapted with a lock cylinder, but I don't where to find them

I have a Value Sliding Glass Patio Door that is 1.5" thick door with an internal lock - and no external key mechanism. Handle is 3 & 15/16" apart. The double hook mortise lock appears the same dimensions as Product (82-238), but the lock cylinder is in a different position - centered on handle hol ... (cont.)