Viewing all customer Discussions for:

17-012 Bracket, #32

Hello, I need to order some new 500 spirals. The old spirals no longer have a sleeve so I am unsure how to measure them. windows are 40" tall and I think I need a 38 or 39-inch spiral. Photo below. Thanks

House was built in 1968

I'm looking for spiral balances for non-tilt sashes that measure 45" tall and weigh 23#. What would you Suggest? Regards, Clarence

I work at a mid century modern house that is a bed and breakfast. The house was built in 1948 and has Alwintite windows throughout. I am looking to replace some of the sash springs. I attached a couple of pictures of one I removed because it came out through the bottom of the sash. Since I ... (cont.)

I need to know replacement parts for my 19" channel balance with 1810 marking. I also need replacement spiral balance for my wood windows. My current ones have red tip 24" long and are 3/8". I also I also need the foot plate.

item; 70-L-25S. Attached please find a picture of the tube balance. The tube balance is 25 inches long, with the width of 5/8 or 9/16 inches. The tip appears to be black. Thank you for your kind consideration, Charles

I purchased four sets of replacement window sashes many years ago and installed them with Quaker replacement window channels. They worked fine for awhile but are no longer holding the windows open. I want to install window balances but do not know which ones to use. I don't know the make of the wind ... (cont.)

Hello, I am looking to replace all my spiral balances for all my windows. The first one is 19 inches long White tip 9/16 inch diameter over metal, the outer case is broken. 5/8 with outer case. Also need the window swivel bracket. Once I get the formula down I can order all of them. D ... (cont.)

The old mechanism didn't work, and I can't find a replacement. I need help with what kind to buy from you.The sash is 31 1/2 inches tall, the channels are 5/8 " wide and 3/4" deep. It weighs 10 pounds. The sash is shown in place and removed.

Hello, I have windows in a home built in 1986. The spiral balances are bad in every window. I can remove the old spiral balances and install the new ones the issue I am having is with the bracket that the small tab on the balance should catch. I believe some of them are rusted out, however they d ... (cont.)

Folks.. We have some older wood double hung windows which were installed at the time the house was built in the 1950's. I'm interested in replacing the balancers and if possible the vertical metal tracks the window rides up and down on... Please see the attached pictures.. can you help me iden ... (cont.)

Dear Swisco, Thank you for your help. Aluminum window, single hung, balance diameter looks to be 1/2 inches, length is 29 inches, bottom of balance are rusted off, no shoe found in the window, Here are a few pictures,

Part is 21 in. long and diameter is 5/8 in. It has a number 2 on the spiral and also word unique. We need 4 of these plus 4 brackets that attaches it.

I can not seem to find this part... Can you please help

Hi, can you help me with the correct replacement parts? I need 23"x 3/8 SPIRAL BALANCE and attachment peace. I will need a total of 4 of them. Thank you.

I have a project on my old windows house. I need some parts but I didn't find on the web. Maybe you can help. What I need is some spring load spiral balances (long 27 or 28" and diameter 5/8 or 9/16"). Because it are old, they don't have any color or specifications. It is just only a metal cylinder ... (cont.)

The house was built in 1963. The windows are non-tilt, double hung wooden windows 30

I need 4 new 32 x 5/8 spiral non-tilt balances for some old wooden windows. Each window weighs 20 lbs. Would you recommend the blue tip balances or the red tipped? I will also need the "foot" or "carriers" for both windows. Thank you

I would like to update the sash and balances in my home to a more efficient window. There is no manufacturer marking on either the window or balance. The only markings on the balance is "genuine cushion glide". I appreciate your help, Jake

I've tried several Swisco orders trying to make my windows work again. In the attached photo, the one at the end is one of the Swisco Series 400s I tried. The original is fatter, but when I tried your series 500, it was too tight, and my handyman would have to carve out the channel to make it fit ... (cont.)