Viewing all customer Discussions for:

17-012 Bracket, #32

I know I need a S500-18 spiral balance with a red tip. I'm now wondering which bracket to use with it? The existing bracket is 3/8" wide and 3 1/2" long. I think the closest thing to it is the 17-012 bracket. Original balances are 70 to 80 years old. Glad I could find a supplier because there a ... (cont.)

We want to build several wood sash windows. Customer does not want vinyl windows. We need the hardware for double hung windows. If we provide sizes can you provide quote for needed parts?

Please help me ID these parts Thanks Dante

I have installed,but window didn't appear to have clip to hold it. It seems like it just goes up the hole. Should I add the piece of hardware that goes under the sill or is there a clip that fis in the hole?

Hi Folks I have a single hung, wood sash of 21 lbs. Height of 28" . From long point of sill to bottom check rail of top sash is 27". Jamb height overall is 54" from long point of sill. Top sash height is 27". Bottom sash is plowed out for 5/8" spiral balances. Bottom sash seems comfortable openin ... (cont.)

I believe I am missing the bracket that the spiral balance locks into under the sash. They are non tilting metal windows. The spiral balance matches closely to the 5/8 in 500 series with the small butterfly clip at the bottom. i tried to capture the underside where I think the bracket should go. ... (cont.)

looking for these parts? tube length is 32 inch diameter is 1/2 inch.

I am making 14 new double hung wood windows, not tilted. Top part will be fixed, just bottom part will be moving. Window size 33" X 88" Can you provide me with all parts specification which I need in addition of Spiral balances to make bottom part open. Thank you.

I have PGT windows that have spiral balances (24" x 5/8" w/blue tip. We are about 100 yards from the ocean and the ends of the spiral balances are rotted off. Some of the aluminum frame is also gone so there is no place for the balance crows foot to connect to. Is there a part that will screw to ... (cont.)

This is from a C-Alwintite window. One of the sashes is missing both balances, and I cannot tell what the hardware is to be. The frame measures 34" high inside. The sash measures 17.5" high. One picture I sent is of a good window, and the other shows how the channel is empty. The frame is distorted ... (cont.)

Hey This is the upper sash balance. The bottom sash balance is a spiral sash (same as Series 500). The diameter of the sheath (if you like) is 7/16". The length of balance is 29 1/2". Other dimensions are in the pics. I've looked and cannot find anything like this. Cheers Peter

Hi I need replacement spiral balances. the dimensions are in the photographs and the diameter of the tube measures 9/16" (so I guess it is a 5/8" tube).

Hi, We have these two double sash wooden windows as seen in the first photo. The two lower sashes (the only ones we're concerned with) each use 2 spiral balance rods, which have become defective. We'd like to replace them but need to get new spiral balance rods. The lower sashes are 32"W x 27 ... (cont.)

My customer has beautiful, custom-made wood windows. I believe they were made by an Amish craftsman who was very good with wood. However, the balances are not mounted in the jamb; they're attached to the sash. The end of the rope is then screwed into the jamb at the bottom. The sash was very ... (cont.)

I need 4 tubes 500 series tube length is 46", sashes weigh 60 lbs each. I also need 2 tubes 30" for 30#sash, 2 tubes 28" for 30# sash, two tubes 25" for 30# sash, I need 4 tubes 28" for 40# sashes, I need 2 tubes 25 " for 30#sash. I also need the bottom ends attached for screwin

the tips on my spiral balances are white. the windows are from the 1950s I am guessing series 400 spiral balances but not sure of what tip color to buy.

Have two wooden sash windows with broken old spiral balances. Would like to replace. Windows have a routed channel 5/8" on both sides. Windows are 24" high approx. 8 lbs ea.

For a Spiral Balance of 23" - 5/8 - series 500 for Non-Tilt window .. What do think of using Bracket #32 Product Code: 17-012 Instead of both Bracket 17-009 And Spiral Balance Shoe 15-009 Would it work? If not, Why? Thank you,

As per discussion this morning with someone there, here is some pictures. ,let me know what product I need, I'll give you a mastercard number to order one for approval by architect, if product is approved I'll order around 70 kits. Probably series 200 will be ok . Pierre

Hi. I'm writing to you to inquire about what size series 500 spiral counterbalances I will need for the bottom sashes in three different non-tilt windows. These are not replacement parts. We will be outfitting these sashes with counterbalances for the first time. The overall measurement for the jam ... (cont.)