Viewing all customer Discussions for:

90-005 Window Sash Lock, 2-1/4"

Hi, I have Jordan windows from 1991. Several of the latches have broken. It looks like either 90-005 or 90-009 will work as a replacement. Which one of these will work? I've attached some pics. Thanks Dave

Your 90-005 Sweep Lock looks like what I need. The dim's. shown are good. I need to know how far the lock extends Past the lock and into the window groove. My current lock extends 3/8" from the lock into the window groove. Will your 90-005 work for me?

I am trying to find replacement latches. They are stamped "Living" which was purchased by Alenco. They are a strange size (the throw) and I can't find them locally. The house is about 15/16 years old and these are for double hung windows. The distance between the screw holes is about 2 1/4", and ... (cont.)

I'm looking for 2 1/4" hole space, 3/8" hole to side of body, sliding window sash locks for a bunch of Alenco windows and the 90-005 looks like it would work except the tongue on the 90-005 has a taper only to about halfway up the tongue while mine are a straight incline from the base of the tongue ... (cont.)

I need to locate a latch for the above window. MI no longer supports and the surface mounted latch is broken. See attached photo. The screws are 2 1/4" center to center

I need two replacement locks for my condo - the original's are by Sunair Aluminum Corp and I found your company while looking on the internet. Took a picture of one of our locks. Tried measuring, but didn't understand if you measured the distance between holes from the center of each hole - if so, ... (cont.)

I ordered the 90-005 to replace Allenco hardware but the sweep is a bit too thick, is the sweep thicker or thinner on the 90-009? How about the 90-086? Any suggestions?

My windows latch was a Sunair Aluminum corp on the latch.... I see that you have had several people purchase your item number 90-005 which is the exact measurements that my latch is... My question is your item number 90-005 does not indicate whether it is plasic or aluminium or metal.... my conc ... (cont.)

Looking for a replacement double hung window lock. The one I have is a Sunair Aluminum Corporation. Dimensions are as follows:Length between bolts 2 3/8 inches, width 1 inch.

In 1999, I build a home and purchased 22 windows from Phillips. From what I've read online, Phillips went out of business in 2009. Many of the window locks have broken over the years and I wish to replace them. Can you recommend the window lock that will replace this. It appears to me that the 9 ... (cont.)

I am looking for 3 or 4 Sunair window latches for slider windows at my house. The house was built around 1994. They are dual glazed windows. The latch is 2 7/8" long, outside to outside, and 3/4" wide and white in color. I am hopeful you have replacements for them. Thank you, Blaine L. ... (cont.)

I have a window that the lock broke. I need to get an replacement. Attached is a picture of the broken lock. The picture is missing the top and bottom potion that is where the lock would screw onto the window frame. When the window is closed the latch fits into the stationary window frame. Than ... (cont.)

Will the Swisco 90-005 be a suitable replacement for the sash locks installed on SUNAIR windows installed circa 1996?

I need to replace 40 window locks with screw holes 2 1/4" apart. My original metal window locks are brittle and shatter under very little pressure. Your website has replacement locks for this size listed at various prices. For budget reasons, I would prefer to buy at the lower end of the price range ... (cont.)

Do you have an underside image of the 90-005 window lock. I am looking for an open hook style catch. The engraved # in the slider is WS IGCC s/n and than WS MED. My lock is Biege but white would also work.

what is the difference between the 90-005 and the 90-009? Our window locks have the name alenco on the top and our house was built in 1991 (texas).

I have Alenco Winddows that are approximately 25 years old that have sash locks with a hole spacing of 7/8 inch, length of 1 1/2 inches and height of 7/16 inch. Are replacement locks availabble?

the 90-005 image shows only the lock, nothing in the description. are the 2 mounting screws included?