Viewing all customer Discussions for:

18-009 5/8" Top Sash Guide

we need two of these parts as shown in the enclosed pictures.The part is 5/8" wide.

Stamped with B.S.I 14-2. Pictures of the winged ends are attached. Guides are 1-3/8" high, 5/8" wide at body, 1-1/8" wide at wings, and screw hole is 1/4" down from the top. I would need 4 of these balances and I also need assistance with identifying the top sash guide.

Do you have the part that screws into the top of the window that catches the channel balance to allow the window to slide up and down. See attached pictures.

not sure what brand of windows these are. House was built 2005 in Crawfordville ,FL Let me know if you have these parts. Thank you.

28 inch 1/2 channel balance with 2740 inscribed on it and top and bottom inserts as shown in the pics. Please advise on correct replacement part. I believe it would be the S350-28 with 2740 option and 5/8" top sash guide. Thank you kevin

I need to replace a broken top sash guide, and it appears that the correct part number is #18-009. All the dimensions check out. The latch on my window says "Viking" but that is the only identification. The photos are of a "good" piece. The bottom screw on every window is a Phillips-head. The t ... (cont.)

Gapco Windows. 2330 24" channel balances. The top guides do not appear to be listed. The top is 7/8" x 11/16". Height is 1-13/16". Width is 5/8" Upper section is 5/8" deep, lower section is 3/8" deep. Top hole is 1/4" from top. Need two channel balance top guides. I am also ordering two 233 ... (cont.)

Window sash cap and 28C window sash guide. Sorry all the parts just fell out.

29 6 HS Caldwell and TOP SASH GUIDEs Thank you Greg

We have Milgard windows and one balancer just broke. I am sure they will all start breaking sooner or later. Is there an exact replacement you can recommend? It is all very confusing with all the shoe options. I would also need the plastic part that gets screwed into the sash (standard?). ... (cont.)

Please help me to find the correct channel balance and corner piece (top winged 27mm by 18 by 30mm)

Hi I am looking for to sash clip similar to your part#18-166 but not the same

This is from a metal frame window with no company name. I notice that your catalog does not have any with wings. (?) Help!

I have a number of Kinco windows which I believe all need the plastic parts replaced...at a minimum the top sash guides. The windows are various sizes but were all purchased at the same time and the parts look similar w/o removing the various windows. Assuming they are the same part I need 2 d ... (cont.)

The metal part is 35 inches and with the plastic pieces on the top and bottom it measures 36 inches. The width is 5/8 inch and the other side is 5/8 inch also. The white piece that gets screw to the window is 1 1/2 inches in height and 5/8 inches wide. Hopefully with the pictures you can help me. Th ... (cont.)

Looking for parts

Hello, Do you stock this nylon top sash guide. If so, what's the part number and price please. Thank you. Cheers,Vincent

I have dug through the top sash guide but I can't seem to find one that is similar.

Looking for these balance stop ?

I am looking to replace Alenco windo top sash guide. 18-174 is similar but overall height is different and the profile is not the same. Can you advise if 18-174 is the correct replacement or is there another part that is correct replacement.