Viewing all customer Discussions for:

S350-27 27" Series 350 Channel Balance

Hello,I have a Window with stiff window balances that I'd like to replace. One has already ripped through the top sash guide, so I'd like to replace those, as well.From my measurements, I found the Product Code: S350-27 (27" series 350 channel balance) and option 2640 for 19-26lbs.I also found the P ... (cont.)

Please let me know which model to choose. This is for a window sash that weighs about 34.6 lbs. The length of the window balance is 27". The pictures provided show the type of the plastic fittings.

Ths only number show in the window channel is G 2630, lenght by us 27"

Marked: 26 5 KV CMC 2. Metal, end to end is 27". Diameter, top: 1/2"............side: 5/8"

27" long (metal); 1/2" wide; 5/8" deep; nylon end near pulley has wings; other end does not have wings.

Stamped 2630. Also has stamp "B.S.1" and "NL" metal channel is 27" long

would like to find out replacement for our broken balancer: non tilt balancer, stamp: 26 3, non-winged top guide, winged bottom guide (see pics attached) Appreciate your help on this, thanks!

Hi I need to replace the channel balance for 2 windows. Current balance shown in photos. Width is 1/2" Length is 27" Window weight is 15.3 lb I think the stamp says 28-2 GA2 CMC 19 But the 28 might be a 26 Is this the correct balance for the window weight? Also the current window side-to-side mot ... (cont.)

3 sets non tilt with plastic ends attached

I was hoping you could tell me exactly what model I need. I will need 4 pairs. There is 2660 stamped on the sides. Thank you.

Customer is complaining spring is not strong enough and would like a bigger spring. 24-6

Hi. According to the attached pics, I was able to determine that I need the Series 350 Channel Balance (S350-27). My question is about the Stamp Option. I believe the "26-5" marking that's shown means I need the "2650"? If so, do people ever buy one or two levels up (like 2660 or 2665) in order ... (cont.)

Hello, I am trying to find the best fitting channel balance for a non tilt window. Original piece shows 26 4 LK cod. Please see attached pictures of the old part.

Hi, I need to replace the window balancer for my Milgard window. The broken part I have is stamped "26 4 GS Caldwell". Would you let me know what product I should buy? Thank you.

2630JB

I need 6 of these please. Let me know if you have these, costs, delivery date. Thanks

Balance is 1/2 inch wide and 27 inch long. Stamp shows "26-5 AI5 CMC 34". I'm guessing this might be equivalent to 2650. Thanks for any help.

the old balance has this on the back: 26-3 AJ5 CMC 50 What is my "sash range"? Which model should I order? Thanks

I need to replace my channel balance, not sure about what sash weight to use, please see attached pictures of old channel balance , by the way the measure ment is 27? from top to bottom, metal only

hi, I am trying to replace both window springs and have matched mine with the dimensions of your S350-27 but the numbers on my springs are 01A DB 26-4. Can you make sense of this for me. Thanks Kevin