Viewing all customer Discussions for:

18-161 5/8" Sash Guide, Norandex

Older window

I need 10 of these.

this is at the top of the window on each side acting a stop for spring loaded tracks..

Window brand. Norandex. Clips have broken on all windows allowing balancers to pop up on side track of windows. I am not referring to clips attached to balancers. Do I need to replace balancers that appear to be fine and just reinstall with new clips as shown in photo?

Hi, top sash guide, Using with your 2230 balaces which work great..

I would like some help identifying the correct channel balance and sash guide for my window. I have non-tilt windows, the channel balance is 1/2" wide and 30" long, and is stamped 2930. I believe the sash guide I need is 18-161. It is 1 3/4" long, and the other measurements seem to match those lis ... (cont.)

Hi, I need 18 sash retains and 2 total 3621DS Complete sash assembly 1/2"

1/2" wide, 32" long (measured the metal part only). Balance stamped with "2230"Also need the plastic part at the top of the balance that screws into the window. pictures attached.Thank You.Don

1/2 wide channel, 2220 stamped on channel, 5/8 channel depth, length 23", ive looked thru the parts and can't find a match forthe sash top guide, i believe i need the s380 channel balance, but if you could help verify, thank you

Hello, I purchased some channel balances several weeks ago for my Alcan windows (house built in 1989). When my handyman went to install them, we realized that there were add'l broken parts. Please see pictures above of the 2 types of items needed.I will need six (6) of each part.Thank You!Marcia ... (cont.)

Need to identify part to go with my last purchase of 380 Channel Balances. 1.75"h x widest (top) 7/8"w ? narrowest 5/8"w The one I ordered is not correct. Please see photo showing: front | side | back of what I need. Thank you Vanessa

Metal to metal is 27" I have a bathroom window with no hardware. Window is 17"

Hello!The pictures are of the plastic cap that attaches to the window sash. It keeps the spring between sash and the frame. I have several of these caps that have broken this allowing the spring to release to the top of the frame and not keep the window open. I have no idea as to the brand of my win ... (cont.)

Need to order some. Part # and price please.

Looking for clip to hold ballast in place for alcan window in a storm door

Hello - I seem to be missing a part on one of my windows. It appears to be a small white plastic guide. One of the attached pictures shows it on an adjacent window and the other shows holes where it apparently fits. The opposite side of each window has a long covered guide that I believe hides a spr ... (cont.)

Need to find out were to get these.

I need replacements for four of my channel balances. The channel balances are 35" long, 1/2" wide and marked "3435".

The clip that is use to pull the widow and also stops the balance. In addition th plastic piece that screws on the window that holds the lowers the balance

the width of the item is 1/2 in and the window weight is 22lbs. thank you for your help.