Viewing all customer Discussions for:

18-161 5/8" Sash Guide, Norandex

Simonton window. Litehouse series year purchased 2004/2005. Single hung. I thought part 18-161, but mine measures 1 5/8" vs. 1 5/16".

Looking for a Swisco balancer to replace the one in picture attached. Also need top sash part also shown in the picture. 1 balancer has part #2930, shown in picture. A second balancer has a part number if #3620 which is a different sized Alcan window. Please advise if more information is needed. ... (cont.)

Need the window channel sash caps as in the pictures. Also want to see if you have 30" channel balance 2930

Hi, I need 2 brand new side window balance's for my 15 year old Simonton windows. I have included the window manufacture sticker that is on the upper right hand side of the window. I can not find any markings on my existing balance. I believe with the sticker you should be able to see or have what I ... (cont.)

Looks like 5/8 wide with an L shape brown or black plastic piece. Thank you, Jose

I need to order two complete replacement valances for one single non tilt out window. I want to make sure I order the correct one.

The balance springs are stamped with the number 2920. I also need the plastic end pieces as shown in the picture.

Thanks so much for your help identifying the parts I need for the Alcan window measuring 53"x62" high.I believe the parts I need are two (2) complete 1/2" channel balances and two (2) white top sash guides. Unfortunately, mine are missing, so I'll rely on your expertise to send the correct ones.Agai ... (cont.)

Picture of the 5/8 Top Sash Guide installed and still functional on my window. The measurements are: Top(left to right) on picture = 13/16 of one inch Distance from Top to screw hole = 5/8 inches Height of Sash = 1 and 3/4 inches Please indicate which would be the closest Sash from your list (b ... (cont.)

I purchased a BSI 1/2" Channel Block and Tackle Balance Non-Tilt 1720 (Alcan) and my husband installed it successfully however we noticed the top sash guide is missing so we need to order a couple but not sure which one from your site exactly fits. Would you be able to tell based on the information ... (cont.)

I have removed the channel balance but was never able to remove the window.I will need 2 37" channel balances, it has the number 3635 on it. While trying to remove the window the takeout clip broke. Will need 2 of them. Also need10 sash guides. I believe this was the original problem. Because I coul ... (cont.)

Need to identify this part

The 30" part no longer recoils as it should. In one of the photos there is a number I think it's 2240. I also need the clips(pictured) that screw into the sash that pulls the balance back down.

body width (with wings) approx 10/16th, length 1 & 12/16th,

I have a alum window that the top plastic clip broke. I have included pictures of the window plastic broken and not broken. I have also included a picture of the bottom balance connector and a picture of the top balance connector (broken) We are selling our home and the inspector will be here late ... (cont.)

I did weight window 24 lb . Stamp on balance 3635 I measured metal part balance @37 " about 5/8 wide I think I need 2 ( 3635 ) balances with upper and lower guides and 5 upper sash guides . I Need for other windows Just to let you know before the balance broke on left side of window it was al ... (cont.)

Looking for white TOP SASH GUIDES that fit in ends of lower sash at check rail on single hung aluminum window Thx Bill

I thought I'd ordered the proper top sash guide from you but the screw hole is too short attached is a front and side view of the guides that need to be replaced

The picture is of 2 broken ones but you can see what they look like

Please tell what your part number is for the enclosed pictures of the top sash guide. Thank you.