Viewing all customer Discussions for:

19-002 Channel Balance Top Guide

Could you help with parts identify? Top (black part)---- I read it as 19-002 Bottom ---- I could not find any exact please help. Stamped reads 28 3 EK Caldwell. I measured the metal channel and it measured 29 not 28. Weight of window is 19 pounds but I have others with exactly the same ... (cont.)

I need to order a pair of replacement channel balances for my window. I think I need 380 Channel Balance with 19-005 and 15-005 for a 26" balance. Can you take a look at the attached photos to confirm this is correct? Thank you so much, Darin

I know I have the right balancer length and width (21" long and 9/16 wide), one set is stamped 2020 and the other 2040 (2 types of windows). Can't quite tell if I have the right top and shoe, I think its 19-005 and 15-005. Can you tel from these photos? Was goint to order your S380-21 thanks! ... (cont.)

I believe I need a series 351 with a 19-002 top and a 15-002 shoe. They are stamped with 1640 and 2840. Please advise. Thank you for your time.

I need some replacement balances. The channel is 1/2" by 5/8" with an outside hemmed edge. The writing on the back is "28 3 10 CALDWELL" The metal channel is 29" long NOT including the plastic fittings. I am pretty sure the top fitting is 19-002 because it does not have flanges. The bottom sho ... (cont.)

Need to identify parts

I believe that I have a Series 351 with a 15-002 Shoe and a 19-002 Top. Please see photos to verify. It is hard to see the difference between the 15-002 and the 15-001 Shoes in your photos. The Top & Shoe are almost the same color with the Shoe being slightly more yellow. The only marking is "2 ... (cont.)

Hi, I need to replace my half inch channel balances in several older, aluminum windows. I have attached pics. Taking cues from an earlier post, the foot does seem to be 1&1/16 inches. The top appears to be a 19-002 and the foot appears to be a 15-003. I need the complete assemblies for 29 inch chan ... (cont.)

there is a 28 f stamped on the back of the channel balancers. They are 29" long and 1/2 in wide but I can not find the exact top and bottom on you site. Tim

Hi Tom- My dad, Jerry Nappi, asked me to send you some pictures of the part he needs. The images are attached. Please let me and my dad know if you need anything else. I can send you more pictures because this site only allows me to attach 5. Thanks, Stephanie

Hope you can help me and the pictures come out,the pictures show 2 sizes 1.25" and 1.0" bottoms,the top is the same size on both,the number on the case is 4240 and are 43" long. I don't know why there are 2 sizes(maybe left and right)and need about 44 of them.And I don't know if I need any special t ... (cont.)

CAN I GET A EMAIL ADDRESS FOR YOU GUYS SO I CAN FOWARD SOME PICS OF BALANCE RODS I HAVE THANKS DON

Hi - hope you can help. Need channel balances and didn't realize there are so many choices! Can you have a look at the attached picture with specifications and help identify the part I need? Incidentally 16D is stamped on my channel balance (might help) Thanks for your help, Steve ... (cont.)

I'm selling the house and this is something that needs to be fixed before closing. I have attached pictures in the hopes that you'll be able to help me fix it.

I don't have a camera to send pictures, but I've measured and re-measured balances, attachments, and windows. I'm fairly confident that I can go with the Non-Tilt Series 351 (1/2 wide) as the top attachment 19-002, and the shoe attachment 15-002 (1x1) match exactly with the measurements on your sit ... (cont.)

Hello, I am needing some help in identifying the type of series I need to purchase. The problem is that I do not have a channel balance that is not damaged. I included some pictures of one that has the least damage. The sash is 1/2" x 29" and has 2820 written on it. Thanks, Miguel ... (cont.)

I have a window with one of balance broken and both balances need to be replaced. I would like to order replacement parts. the label on the window says: AAMA Certification Program MFR: PHP-28 Series:810S A-L-I@ VALIDATOR a balance is about 28 inch long and on the side there is a blue lab ... (cont.)

I think I have found a close match but I am sure it is not exact. I have a non tilt single hung Milguard window, the window pane and inside frame when removed measures 28" wide by 20 3/4" tall. Both balancers are completely missing. On a seperate window, the height measured 29 3/4" and the balan ... (cont.)

I need to replace an 18" long 1/2" channel balance. Your series 390 is the closest match but the balance I have has a 19-005 type top instead of the 19-002. What do you recommend?

I need to determine if top sash guide is required for balance number 2230. I also need to replace the channel balance top and channel balance shoe and believe these parts to be channel balance top as 19-002, and channel balance shoe, winged as 15-005. I also need to replace take out clips which I ... (cont.)