Viewing all customer Discussions for:

S380-23 23" Series 380 Channel Balance

Good day. I am not sure which series to select to replace balancers on 10 windows. The only mark on existing balancers is 22E. Can you please help. Thank you.Ivan

I need help choosing the correct channel balances for my window. The balance is stamped with 22B and they measure 23 inches. I have no idea what the top and foot are.. Thanks

Not sure which half inch balanced these are. I have three different lengths.

2230 F channel balance. 23 inches long. 5/8 " deep and 5/8" wide

Need 6 29" metal plus plastic end pieces, strings, pulleys and springs, 14" spring plus 3/8" spring hook each end, 14 3/4" total length of spring. Stamped code on channel 28D USB. Also need 4 23" metal plus plastic end pieces, strings pulleys and 10 1/4" spring plus hooks, 11" total spring length ... (cont.)

1/2 wide channel, 2220 stamped on channel, 5/8 channel depth, length 23", ive looked thru the parts and can't find a match forthe sash top guide, i believe i need the s380 channel balance, but if you could help verify, thank you

Looking for a replacement window balancer. Stamped 2290 25

Vinyl single hung window Need right and left. Marking is 22 3 EU CMC 2. Each side is 1/2 inch. What is the part # for ordering?

Please help me id the correct replacement part. Length 23" Width 1/2" Stamp 2230

The balance is 23'' long, with the stamp "22 3 FO Caldwell" on it. The "FO" is a bit unclear (see photo), might be something else.

Marked with 22 3 Caldwell JL. Metal length (not including plastic parts) 23". One end of plastic piece was broken. (Length of entire piece including plastic end pieces 24").

i need a new window balance. i want to make sure i get the correct one.

Our channel balance on our window is broken and is making it so we cannot close the window. I am not even able to get the window out because we cannot get the window closed enough to flip the clips on the sides to remove the balance from the window itself. I have the same window in a different room ... (cont.)

Could you please help me to identify this window balance.It has a letter and number K 2240,length 23inches,witdh 1/2. Thank you

Single hung window, non-tilting Imprint on channel balance is 2240 AD BSI It is 23" long Width of channel balance is a bit more than 1/2"

The window was really hard to open. Then this part came out of the side. Is it something thats fixable? There is a number stamped on the outside of it

Hi,I live in Lake Placid, FL and have NuAir windows in my 1993 home. I need to replace the channel balances for 13 windows. My question is are there two balances per window? The windows are approx. 52" wide by 49.25" high. The number on the channels is d 2240 31. Can you tell me which channel I wo ... (cont.)

The balances have the following numbers stamped on their sides 2020Z (21 inch) or 2220Z (23 inch).They are both 1/2 inches wide and appear to have the 19-005 fitting on the top and the 15-004 fitting on the bottom. I need 12 of the 2020Z and 6 of the 2220Z. Do either the 385 series or the 800 series ... (cont.)

23 " as measured on the metal. Thanks

I need new channel balances for a DIY project. I have two different sizes: 23" shaft length with 22E stamped 29" shaft length with 28 D stamped. Both have the same top & bottom pieces as shown in the attached pictures. I need to order 6 of each, and want to verify that I am ordering the correct re ... (cont.)