Viewing all customer Discussions for:

S380-23 23" Series 380 Channel Balance

Could you please help me to identify this window balance.It has a letter and number K 2240,length 23inches,witdh 1/2. Thank you

Single hung window, non-tilting Imprint on channel balance is 2240 AD BSI It is 23" long Width of channel balance is a bit more than 1/2"

The window was really hard to open. Then this part came out of the side. Is it something thats fixable? There is a number stamped on the outside of it

Hi,I live in Lake Placid, FL and have NuAir windows in my 1993 home. I need to replace the channel balances for 13 windows. My question is are there two balances per window? The windows are approx. 52" wide by 49.25" high. The number on the channels is d 2240 31. Can you tell me which channel I wo ... (cont.)

The balances have the following numbers stamped on their sides 2020Z (21 inch) or 2220Z (23 inch).They are both 1/2 inches wide and appear to have the 19-005 fitting on the top and the 15-004 fitting on the bottom. I need 12 of the 2020Z and 6 of the 2220Z. Do either the 385 series or the 800 series ... (cont.)

23 " as measured on the metal. Thanks

I need new channel balances for a DIY project. I have two different sizes: 23" shaft length with 22E stamped 29" shaft length with 28 D stamped. Both have the same top & bottom pieces as shown in the attached pictures. I need to order 6 of each, and want to verify that I am ordering the correct re ... (cont.)

The metal portion of the channel balance is 23 inches long. The window is 25 inches tall X 51 inches wide.

I need to order some new channel balances for some non-tilt CWS windows. The code at the bottom is only three numbers spaced like such 22 5 followed by a small RD then large BSI. The dimensions I have measured is the metal 23", 9/16" width, and 1/2" depth (most people are saying theirs are 5/8" bu ... (cont.)

Markings for Pictures attached: 26 4 GW CMC 7 (Window 1) Markings for no pictures attached: 22 4 IL (Window 2) What part numbers would I need?

Which model do I need for both of these balances? Is it recommended to replace both balances at once? The majority of my windows don?t work (they won?t stay up). They didn?t work within a year of having them installed 10 years ago. Is it recommended to replace the windows or give these new balance ... (cont.)

I do not know exactly which channel balance I need. I would like a brand new complete unit for two windows. The windows are located in bedrooms, they are non-tilt, the current channel is 1/2 inch. The length isn't quite 23 inches. The windows are pretty heavy, I don't have a scale to weight them tho ... (cont.)

Attached are pictures of the ends and name of my window spring. Please help with identification.Thank you!Robert

I need to replace a broken sash. I know I need a 23" type 380 but not sure about the sash weight. There are no markings at all on the balance. The window sash is 26X51 inches. What option should I choose? Don't have a scale to measure it

The 5 photos hopefully give you enough information to identify the channel. Windows were installed in 2001. The channels were supposed to be identical but it would appear 1 has been butchered for an unknown reason. The only marking on the channel appears to be 22 4 HR CALDWELL (but is a bit uncl ... (cont.)

Hello, I need two window balances to replace my old ones. Here is the info I can provide: Measurements are 23" in length metal end to metal end. 1/2 wide channel Number stamped on the metal is 220 USB I appreciate any help you can give me in identifying the correct replacement and am hap ... (cont.)

Pls advise what bracket # to order and use.

Looks like# 380 series, but not as rounded. Also, have 2 different balances. Also need the top trim that attaches to the window. Am I taking on too much to try to replace weatherstrip? Thanks

I need to replace the window balances in several non-tilt aluminum windows of unknown manufacture. The house was built in 1953. I have removed the lower sash from one window. It which measures 51" wide by 22-5/8" ht. The sash weighs 29-30 lbs. The old balances are 1/2" in width and 23" in length ... (cont.)

I need to replace the block and tackle devices on two windows. The first device has a designation 22 4 IQ Caldwell the second designation is 24 4 EQ Caldwell.I wish to replace both devices for each of two windows.I will attach photos of the plastic ends.