Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

Channel numbers are "26 3 HP CALDWELL" PLEASE IDENTIFY PART INFORMATION

Measures 27" metal end to metal. The plastics ends look differently. Can you please tell me which size we need?

I have two windows that need new balances as the balances slip up past the top of the slider when closed and the pulley systems are deteriorating. The markings on them are 2640 XF BSI, and 2620 NL BSI.

Hello. I need new balances. Here are pics of the old ones. The channel is 27" long. Thanks.

See attached photos of the balance I have. The metal part measures 27". I'm thinking it's your '27" Series 385 but not sure of the window weight. Thank you for your help...I need to get one ordered.

The balances I need to replace are 27 inches long, and are stamped "26 5" and "B.S.I." with the letters "PP" or "dd" depending on which way you look at it. The bottom nylon shoe measures 1". The cord clips are a flat-stamped deep "c" shape. Is the S380 your recommendation for replacement? Sorry ... (cont.)

Need new balancers # 26-4 BA CMC 11 that's the balancers number

Dear Swisco,I have a channel balance in need of replacement, and was recommended to your website. I believe that I need Series 385, based on attempts to match up the top and bottom pieces. Can you confirm that this is the correct part?The metal piece is 27" long. But here's the thing, the origina ... (cont.)

Hi, I'm looking to replace 4 windows with this channel balance. I can't seem to determine whether my channel balance will correspond to your S380 or S385 balance. Please advise. Thanks!

Please help ID which S model Balance that I need to Order.

Need to replace two Caldwell window channel balances. Metal part measures 27 inches. Writing says "26 4 BL CALDWELL". Also missing one metal clip on one side of window, so need to replace that as well.

Hello I am going to need 10 of these balancers. Can you tell me the part number?

I have four large Rollyson windows which need their channel balances replaced. The balance markings on one channel balance are "36 4 AN CALDWELL" and the metal measures 37 inches in length. From the pictures they match either Series 380 or Series 385. Which one do you recommend I should order? Also, ... (cont.)

I have a Alpine single hung window about, older around 1990. Need to replace both of the sash balance and the balance cam. The Balance is stamped with 26 9. 34# DL Caldwell Width = .5in The plastic parts at the bottom and top of the Balance have fins, overall width = 7/8in. The Cam ( what ... (cont.)

one channel is 27 inches long metal part and the ends are in the photos (all of the metal parts say "26 4 AQ CALDWELL") Second channel is 24 inches long and the ends are the same as the one in the photos (the metal on this one doesn't say anything)

I have a window that the side spring doesn't stay in place and the sash is cracked on the lower pane. The tag inside reads Aama/nwwda 101/I.S. 2-97Vx 1H-LC30-48x84H-LC30-96x72(mull)I think if I could just get the window part with the side springs I could just replace that and not have to mess with t ... (cont.)

Hi there. This is looks like the 27" 350, but I can't find a stamp number (I checked both balances, and can't find the manufacturer on the window or frame.) The window weight about 18.8 lbs. Should I just use 2630? Thanks, Steve

size's are 21' 24' 27' all seem to be 1/2 I need to purchase these parts can you please let me know if you have in stock and cost. need: 4 - 24' 2 - 21' 2 - 27' thank you

27" x 1/ 2 metal ,, just want to know the exact part to buy, need 6 tracks complete,, and would also like to know the part # for top and bottom plastic pieces ?? Thanks!

Looking for part