Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

PLYGEM WINDOWS FOR SCHULT MODULAR HOME SERIES 1500 SH MODEL H-LC25-48X96Hi Can this window be repaired without replacing the entire thing?Steven

The metal part is 27" and the number in the picture looks like 26 3 to me. Is the enough information?

27" long metal body Printed on it reads 26 4 AS CALDWELL I found one video to identify the top and bottom. Top is 15p142. Can't tell what the bottom is because its worn away some.current measurement of the bottom is just shy of 1 inch I also have a broken removal clip, photo attached ... (cont.)

Body is 27" long

Sorry, no pictures of the part installed. The part is 27 inches long. The part number is 2630. Please note that it has plastic clips riveted into both ends. Each balance fit into one side of the window. Please let me know exactly which part is right for me. Thank you. I would like to order six of th ... (cont.)

Please tell me the parts corresponding to the balancer of the attached MILGARD single hang window

I live in a 2007 Redman Manufactured Home in Yuma, Arizona. I need to replace channel balances and guides. The balance is 1/2 inch wide and 27 inches long. I have reviewed your videos on how to measure the balance properly. I think the balance is either a S380 or S385? The guide looks like a 18-176 ... (cont.)

I need to replace the balance springs on two of my windows. Can you help me? It looks like the stamped numbers are 2620 BSI, length is 27".

Need a replacement balance for this. DO you have one?

Need Milgard Window Channel Balance, 27" long with attachements, for both left and right side

Alcan i need 1 new balance

The old channel balance has the following info stamped on it "26 4 CW CMC1". The length is 26 but what about the tension? Please advise

Need two of Window Balances 26-4 ID5 CMC 54

The metal is 27" long, 1/2 " wide. The stamp says 26-4 DE5 CMC 54. I don't know the manufacturer of my windows. I need 8 sets to replace all balances in 8 windows. Please see pictures attached to help find correct part. Thank you for your help.

Hi, Wondering if you can help in seeing if you have replacement balancers for this Milgard window. The part I am looking for has the following stamped onto the balancer:26 3 HU CMC 2 I have attached photos of the balancer with this message.Thank you so much,Nicci

Hello, Could you please provide me with the correct part number on your site to replace this 27" window balance? Thanks, Paul

I would like to buy 2 window channel balances for a fairly heavy Florida window unfortunately I do not have either of the channel balances that were in there to go by. I know the metal part of the channel needs to be 27 in Long. I have a photo of a window very similar which has channel balance code ... (cont.)

1/2 inch wide. 27 inches long, (not including the plastic ends). Milgard window decal inside the frame, but no markings on the balance. I also need to order some of those metal springs that go into the side of the frame. Thanks!

I WOULD LIKE TO PURCHASE WINDOW BALLANCERS 26 GW CMC 7 AS THE ONES INSTALLED IN TWO OF MY CONDOS WHICH I RENT OUT HAVE BAD BALLANCERS THANKS JOHN

Can not find the same parts.