Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

I need to replace the balance springs on two of my windows. Can you help me? It looks like the stamped numbers are 2620 BSI, length is 27".

Need a replacement balance for this. DO you have one?

Need Milgard Window Channel Balance, 27" long with attachements, for both left and right side

Alcan i need 1 new balance

The old channel balance has the following info stamped on it "26 4 CW CMC1". The length is 26 but what about the tension? Please advise

Need two of Window Balances 26-4 ID5 CMC 54

The metal is 27" long, 1/2 " wide. The stamp says 26-4 DE5 CMC 54. I don't know the manufacturer of my windows. I need 8 sets to replace all balances in 8 windows. Please see pictures attached to help find correct part. Thank you for your help.

Hi, Wondering if you can help in seeing if you have replacement balancers for this Milgard window. The part I am looking for has the following stamped onto the balancer:26 3 HU CMC 2 I have attached photos of the balancer with this message.Thank you so much,Nicci

Hello, Could you please provide me with the correct part number on your site to replace this 27" window balance? Thanks, Paul

I would like to buy 2 window channel balances for a fairly heavy Florida window unfortunately I do not have either of the channel balances that were in there to go by. I know the metal part of the channel needs to be 27 in Long. I have a photo of a window very similar which has channel balance code ... (cont.)

1/2 inch wide. 27 inches long, (not including the plastic ends). Milgard window decal inside the frame, but no markings on the balance. I also need to order some of those metal springs that go into the side of the frame. Thanks!

I WOULD LIKE TO PURCHASE WINDOW BALLANCERS 26 GW CMC 7 AS THE ONES INSTALLED IN TWO OF MY CONDOS WHICH I RENT OUT HAVE BAD BALLANCERS THANKS JOHN

Can not find the same parts.

Trying to determine if you carry the replacement parts for these channel balances. Our windows are non-tilt & the balances are 1/2" Thank you for any assistance! Margaret

Hi Guys, Can you please identify this balance, it is 27 inch long and has 264 Caldwell Dm stamped on it.

I have 20 year old Mercer vinyl windows that one of the spring lifts cords broke. Images are attached. Total length is 28 inches. The markings are in the third image provided.

1/2" wide & 27" in length

Metal measures 27" long and it is 9/16" wide. Stamped on back is the following designation: "26 4 BV CMC 2".

mine are single hung windows, over twenty hears old. One is stamped 20 3 KP Caldwell, and the other 26 4 LP Caldwell. I'm looking at 380 and 385 as likely clones but can't decide which. What is difference?

The pulley wheel (?) is cracked. Do not know if I need whole new channel guide or wheel parts. Window is non tilt.