Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

Need replacement window spring. Part number inscribed on side of spring is "26 3 HP Caldwell". The metal part of the spring casing is 27".

Looking for help identifying the correct replacement Assembly. Only identifier is 26 4 LN printed on back. Frame measures 27" from end to end.

The number on the rail is 2610

Have attached printed on the balance with 19-005 on the top and 15-004 on the bottom with a 27" channel. Is it correct to say we need a 2640? Regards

I would like to replace the entire unit. it is 5/8 inches wide and 27 inches long. I would rather not have to assemble to replacement, if there is a complet unit available. Thanks

Need help identifying replacement part, No no numbers on unit, metal channel 27" long, 1/2" channel width (5/8 overall width) 24# window. Photos of ends attached

Pictures starched

Hello my balance is 1/2" wide and 27" long, it has the following marks: 26 5 JQ CALDWELL.

Hi I need a replacement for this channel balance; from a Milgard window stamped with 26 4 Caldwell. It is 28" long and 1/2" (or maybe 9/16") wide.

I'm looking for a window balance that is 27 inches. I think it might be the 27" Series 380 Balance but I'm not sure what the weight is. The stamp on the old balance says 26 4 FU CMC 2.

Hi, My old channel balance has 26 4 H0 CALDWELL, what is the sash weight option?

26 3 B.S.I.

Can you guys make me 2 of these window balances. You previously had done balances from other windows in my house. Looks like a custom order which I am fine with.

Hi,Attached are images of our balancer (27" long). I can't see an exact match for the top one. We have a notch in the middle which i cannot find in your catalog.Could you tell us which one to order?I think S380 is the closest (https://www.swisco.com/27-inch/pd/Series-380-Channel-Balances/S380-27).Or ... (cont.)

The old balances match your 380 series, however the stamp for the weight of the window does not match. The stamp (see photos) reads :26HP 40-42 JGW CMC 4Witch of the 380s should I order?ThanksBud

Ok per Bob i have taken out one of the sashes and hopefully now we would know to order . It is a lawson series 7000 number on it was 2630 and is 27"

Need replacement for Kinro part number 26-4, B.S1. Thanks Jay

2630 is stamped on it, 27" without plastic attachments

Need to replace one of these.

Hi, I need to replace two different sets of window channel balances. They are both ½ inch wide. They are being used on Milgard windows.One set is marked 26 5 GQ Caldwell and the other is marked 26 4 IQ Caldwell( so I will need two of each, four total)I would like to know price