Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

27" Channel Balance, what size do I need?

Hi, I need replacement 27 inch Milgard chanel balance, need 24 of them for 12 windows Makings: 26 4 HT CMC 4

See attached photos of the balance I have. Can you tell me what part number of yours is a match. I'd be needing 2 pcs

these are the numers on my runner. can you advise what I need to order please?The rod is 32" by 1/2". See attached Potos for ends.Please advise which replacement I should order.

I need help with a replacement for a broken window balancer. Please tell me what part to order from you. Window weighs 21 pounds. I also inquired about another window in reference number D148406. Thank you Sue

My window has 2 different balancers with 2 different part numbers probably because someone worked on it in the past. I will replace them both so they match. The window weighs 23 pounds. Which part should I order from you? I also need help to identify a 33" balancer. I will send a separate message ... (cont.)

I want to replace 2 balancers for my one widow. The balance has a stamp: 26 4 E 0 Caldwell metal piece = 1/2" wide, and 27" long both top and bottom plastic pieces have wings shoe = 1" wide

Need 4 of these window ballasts for slide up/down windows?

Hello, I have a broken channel balance and from a similar post I believe it is a swisco part. Could you help me identify the correct replacement part number? Please let me know if additional pictures are needed. It is 27" The identifier stamped on the part is 26 4 CV cmc 7 Thanks! Gabriel ... (cont.)

The little rope inside broke.

mine have a number of 2690 35 , or 2690 29 on them. Over the years I have replaced many and I think one is stiffer. I like the easier glide. I see you do not have 2690. Would the 2670 work?

Hi, would you please confirm that an S380-27, 2640 is the right balance for me? The old balance is 27" long (metal channel only), and my sash weighs 20 lbs. Thanks!

Do you carry this replacement balance?

I have a Cladwell 26 4 window balance that is 27" length. What would I be ordering as its replacement?

Hi, Although the "26" suggests 26 inches, I measured the length of the steel profile to be 68.5cm = 27 inches. I hope the photos help to clarify. Please let me know if you have replacements and what it would cost. (Single side or pair) Thanks Josef

Hello, I have a sash window balance I need to replace. The metal part is 27" long and it has plastic white bits at the top and bottom. Has some kind of pulley mechanism. It says "2630" on the metal and in small print "B.S.I." and in even smaller print "RH" The images are of a "working" one. I have a ... (cont.)

Hi Can you please tell me what is the replacement balancer for the above pictures. The size of the balancer is 26 7/8 inches. Thank you.

I am having a hard time determining what Series Type of balance I have. They are 1/2" wide and 27" long. From other threads I believe I should have the 2650 option. Thanks for the help!I also have an issue with the part that the balance slides and connects to. It is the plastic piece that is screwed ... (cont.)

26 4 BR CALDWELL stamped on back. Metal channel is 27 inches long,and 1/2 inch wide. Shash is aprox.18.2 lbs.

I am replacing a 27 inch Caldwell 26 4 KK for an 18.8lb window. Which series do I need? Also which guides? Thank you.