Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

Hi there, and happy new year! I'm in need of replacing 4 of these 2830 , 29" long balance springs from a single hung window(s). They're from 1987. My closest estimation is your Product Code: S385-29. Thank you, Kevin

I need 6 replacements stamped 28C USB. If this works out I will order more.

S380-29 Option 2890 with 15-029 shoe Quantity: 2

Hello, Can you please help me replace my window channel? I have attached pictures if the serial numbers. The metal portion of the rod is 29 inches long. I will need about 10 of them plus the rollers and the pulley cord assembly. I don't know what kind of windows I have but I would be grateful for an ... (cont.)

One of my rental has a not functioning window and the balance needs to be changed

I need to replace 4 balances. The windows they live in are identical, but the balances in the frames have different markings. Otherwise they seem to be identical. One set of balances has the markings "28 4 EK Caldwell". The other set says " 28 4 EP Caldwell" Both sets are 29" long. The metal hook i ... (cont.)

need 2 window balances with 28-3 stamp

Length 29 inches width half an inch

Please let me know the correct product to purchase. Thank you

Require 2 broken window balances. Only marking is 28C. Metal portion of the balance is 29 inches long. Winged plastic tips.

Good Morning, In need of replacement channel balances. In speaking to customer service, it was determined that these will need to be custom. The length of the channel is 29" Width of the channel is roughly 5/8" The depth of the shoe is between 7/8" and 15/16" Stamp is 28C I will need (10) balances ... (cont.)

Good afternoon, I am in need of four Non-Tilt Channel Balancer, dimension 29 inches in length and 1/2 inch in width 29x1/2 inch. I am in need of four quantity of them.

28-4 BA CMC and either 11-1 or 1-1 (I can not make out the final section). Width is a half an inch. I have trying to find out what channel balance to replace my existing ones with.

There are no names, numbers or markings on existing balancer. Metal to metal length is 29 inches. Photo of the window attached so you can see where the balancer goes. It's a single hung window with W X H dimensions of 35.5" x 32" for each sash (or 35.5" x 64" for the entire window) Can you please h ... (cont.)

Looking for new balances for 2 windows 29 7/8 H x 33 1/3 W. weighs 24 lbs. window is about 20 years old - looking for small square pieces screwed to side of windows as well -thanks

Hello There I would like to buy 1 window balance as shown from the picture Please let me know how to order this window balance, thanks Tony

I need two window baqlances measurinf 1/2" wide and 29 inches from the ends of the metal strip. It lools like one of the balances in your S300 series. The part number stamped on the metal strip looks like 28B and I have included a photo of it. Please see all the photos.

I hope these pictures can help identify what part I need.

I've attached pictures of my balancer. I measured my original balance and it was 29 inches metal to metal. I see that the number "28c" has no bearing on the final balance. I need 10 replacements for 28c and two for 28f (second is a bigger window).

we need 2 different balancers 1. code 3230, 33" - 40 pcs 2. code 2820, 29" - 120 pcs not sure about what type of shoe and top attached