Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

Hello, I am trying to identify a window balance spring so I can replace. Can you please assist me. Metal portion of this spring is 29". Depth and Width are both 1/2". The spring supports a non tilting window sash that is 48 inches wide and 30 inches tall(very heavy). Stamping on this window balan ... (cont.)

Over all length 30" channel 29" markings stamped on channel 60. BG1AX PLASTIC ENDS ARE 1" WIDE the medal hook is 1/4" wide 3/4" long

Please I need to replace , this is 29 ' length with plastic wings

I have to replace two or three brackets they are 29 inches long.

I'm trying to purchase the correct parts to fix my windows. The first attempt at the local place didn't work. I'm fixing two windows so I would like 4 window balances and the correct plastic fittings. Would you help me? The metal sash measures 28 7/8ths. The window weighs 13 lbs but was also hard t ... (cont.)

I need replacement channel balance 28 4 fx cmc 11 for Non tilted window. Length of metal 29"

i need 2 29 9 of BS1 channel balance

Regarding my previous 2 posted questions. I'm wondering if your S385-29 channel balance will work? I weighed my window. It weighs 15 pounds. So would I need the 2820 option? Will this product work for me based on all the info and pictures I've sent. Thank you.

Lester is waiting on pics to help me identify :)

29 inch in length 9/16 width. 20lb window weight. Stamp says 28D USB

Hi there, I'm in Orlando, Florida. I have single hung windows. Some windows won't stay up. The balances need replacing. I see the number 28 B stamped on it. These aluminum frame windows are original to the house which was built in 2005. I am looking to replace the balances. Also the plastic that is ... (cont.)

Can you please help us determine which window balance to purchase to replace this one? The window says EPI. It's on the left side of the window. Thank you!

Harcar single hung non-tilt windows Channel balance rods. Only marking is 2830. Channel length is 29" measuring only metal. 30" with plastic clips. Channel width 9/16" so I believe that is 1/2" in trade.

I have balances with wings on the top and wings on the bottom. But my shoe is less than one inch deep. A swisco rep says I can get that as a custom shoe. I need 30 of these, 29" long channels, my sash weighs 14.2 pounds. They're all the same size windows. And I need the top sash guide too. ... (cont.)

Hi there, Please confirm which channel balance to order. The length 29" There is a marking on the stem "28C" Regards, Dru

Good morning, I trying to find out which is the properly balance that fit for some window. The length is 29 inches and the stamp say 04-10 UNIQUE 28-D-40. And if you have availability. Thanks

I'm looking for replacement for this item 28 5 AX CMC 11 (printed on the channel balance). Thanks!

We have channel with 28G stamped on it. This appears to be a custom order according to what I have read on your site due to heavy duty spring. We have measured the shoe and judging by pictures on your site it it very similar to the Series 380, but our show measures 7/8", not 1". Can you please he ... (cont.)

I don't have pictures of this window balance while it was installed The metal part is 29" long. It is stamped 2820G on one side. No other identifying marks. The shoe measured exactly 1" per the guide picture. But it was slightly different than your pictures, and I suspect it has been worn down. I ma ... (cont.)

The channel balances just have 28D stamped on them. I've included a picture of the existing channel balance. Just want to confirm that this is the 29" Series 390 Channel Balance 2840. Thank you!Also, window sash weighs 23 pounds. The metal portion of the channel balance is 29" in length and the s ... (cont.)