Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

Both window balances 29DS 38 window latches are broken off missing 9 balance stops

Balance# 2950

Please let me know the exact channel and channel guide i need to order for this window.

Need to find replacement for this channel balance. Part 29-3 ga2 cmc 24. Bottom Guide: Guide I have is one 1” and winged Top Guide: Guide seems to measure 1 and 1/8” and winged

I need help. I need to purchase 4 of these. Can you recommend me what to purchase. The only markings I found is: 29 2 BSI TJ

Pls tell me which balances I need to replace these. My home was built in Riverview FL in 2017 w-7500 sq ft., and 26 windows. The windows are now starting to be difficult to open and balance components are breaking (plastic tips, springs, etc.).

I need 2 pieces

The balance is 30 inches (metal only) long, 9/16 inches wide. The attached pictures show the ends of the balance.

Stamped 29 3 JV Cmc 2 and 29 3 GV 2 A little over a half inch wide

I need to identify the two channel balances and 2 window sash parts in the included photos so they can be replaced.

Good evening. Most of our windows will not stay up anymore. I have taken this window spring out but do not see any kind of markings on it at all. It seems to be 1/2 inch wide and 30 inches long. I would just like to make sure I get the right ones ordered up. Thank you for your help ... (cont.)

I have 29-5 LX CMC 11 I know what the 29-5 means, it is like your 2950. But what does the LX mean? And the CMC 11 mean? I also need (4)29-1, (10)29-2 and (14) 29-5 (Qty) all with wings top and bottom.

The balance number is 2930 stamped on the device, see photo.

We are trying g to identify this so it can be replaced. 30long x 1/2 wide Top clip is 1 3/16?

I am looking for the balance channel 2930 bs JL Is the right and left are the same if the same I need 4pieses or two pairs please let me know so I could order ot

Hi! Can you please advise which balance of yours would replace? 30" length, 1/2" width. Thanks!

Looking for a replacement part for the window balance. Code on old part is 29DS 38 This is 30 inches long.

I would like to order two replacement channel balances. Please see attached photos, which are labeled as top or bottom of the balance. If you need more information, please let me know.

Please let me know if you have any in stock

Looking for 4 channel balances and stoppers for some old Harcar non tilt windows. Channel balance length is 30" (metal only), width is half inch. Picture 3945 shows stamp number on the metal. Also need the black stopper parts ... all of those became brittle and broke. Can you help? ... (cont.)