Viewing all customer Discussions for:

S390-29 29" Series 390 Channel Balance

Hello, I need some assistance in finding the correct channel balance. I have 30 year old Milgard single hung aluminum windows that are double pane. I will attach the pictures I have taken. Can you help me with getting the correct balance?I have looked at your site and this is the conclusion I have c ... (cont.)

The rail is approx 3/4 inch wide and deep. I can't match it up with anything I see on the site under 23" (2240). Looking for complete unit and caps that are mounted on the window as well.Also looking for 29" (2840).Thank you for the help.Mike

28 4 AN CALDWELL

I am trying to figure out which balancer I need so I can replace my old ones. The stamp on the side of the balancer reads: 28 6 CW CMC 10 Any help would be appreciated. Thanks! -Sonny

These windows are from 1995. I can see LN CALDWELL imprinted on the back, but I can't read the number. This one is 30" long end to end.Thanks,elgin

Good evening, I have a 29 inch length tube, not counting the end parts. Please advise as to the correct parts to order. Pictures are enclosed.

I need to replace some Jordan window channel balances. House built in 1996. The windows are 30 " tall. The channel balances are 30" long from the plastic tips at both ends. The windows are stamped "Jordan A 96" , the existing channel balance markings are a little faded, but I think they're marked "2 ... (cont.)

Need help with identifying the correct shoe. The part seems to measure more than 1", but less than 1 1/8". Trying to decide if the 351, or the 390 is correct. Also the guide in my picture looks different than your 19-002. Will yours still work? I am going to order the 2803, is that what the stampin ... (cont.)

I want to make sure I'm getting the right balances with the correct plastic end parts.the stamp number 2850 is obvious and the length is 29", but if you could please varify the end parts so I can order the correct ones-that would be appreciated.thanks for your time.Jack

I'm not sure which channel balance series to chose. The number on my channel balance is 2830x. Which channel balance do I need?

The window channels to be replaced are marked 2830, 29 inch aluminum. I'm not sure of the balance shoe sets needed, and want to make sure I order the correct ones. Any help would be appreciated

The metal Chanel measures 29 inches. the metal is stamped 2830. I have seen several of theses online although some of the plastic parts are different and vary.How do I get the correct ones? or do I just order a 2830 and it will come with the correct plastic parts? Any help would be great. Thanks Car ... (cont.)

Hello, Needing to purchase 4 replacement balances. They are 29" long. I think I need the S380 with the 2830 stamp, but the bottom boot on mine don't have the outside retaining clips. Wanted to confirm they were the correct ones before purchasing. Thank you very much!! Michael

Looking for the name of this part from a Jordan window and what other part might be needed along the one pictured to make the repairs. Numbers on the part are 2830

Need 2 (left and right) of this part - measures 30" from outermost point on plastic pieces end to end. There is a number stamped on it: 2820B (the B is backwards when reading the number correctly). Last repair needed before closing on a home. Thank you

The house was built on 1985, the windows on the picture, the springs have some # 16 CP and other is 28 CP

Hi: my windows weight is 22 lbs Balance width is 1/2" length balance (metal) 29" Can you said me which one is good for me Thanks, Carlos

Hello, I would like to replace the balance for the windows, but need to know the right one. Attached are some photos of one to be replaced which I believe measures 29-ins in length and 1/2-in in width. Thank you for your assistance.

Spring loaded window balancer marked as a 2830 with a BSI stamp located near the 2830 stamp. This is for a Jordan brand window in a house built in 1988.

Hello - My broken channel balance is inscribed with BSL 28300 (but the last zero looks like a backwards D). I suspect your comparable replacement part is Series 380 Channel Balances 1/2" x 29". Can you confirm? Thanks, Darec