Viewing all customer Discussions for:

21-054 Bifold Door Top Pivot and Guide Pin, Leigh

Hi! I have a full vu bifold door that I can’t seem to get back on track. The door isn’t sitting high enough so it drags on the bottom and I can’t seem to things aligned. What parts might you recommend to help get this working again?

I need help identifying the correct parts for the above door (95 inch doors).I don't know whether the diameters are 1/4 inch or 5/8 inches?? Thank You

I want to replace the pins for this old door, not sure which pins I need?

I need help finding a 60-in and a 48-in track that would work for these doors. I have. The current tracks look like the photos I submitted. Thanks Patrick

Hi I am looking for replacement hardware. Regards Tony

Would like to buy hardware for the following 2 doors. Leigh Full-Vu Metal Bifold Doors. Attached find label of door. Pics of the 4 corners of the door. Do you have replacement tracks for these doors? I can see that a spring and cotter pin is missing but have no idea if anything else is missing. ... (cont.)

No markings on any of the parts, unknown maker of the metal bi-fold door. Removed pin not knowing pics needed before removal. Pin in pics is 5 1/4" long x 1/4" diameter. Spring and cotter pin were on it. Plastic gasket in bottom and top of door holes (may be nylinders?) No plastic cap on top of ... (cont.)

Hi, we purchased a 1967 mid-century home 10 years ago. In several of the rooms, the door systems need hardware and tracking system replacement. I've taken photos of one bedroom/office that is in the worst shape. Looking forward to receiving advice and guidance. Thank you, Patt

this is my full vu door parts are in good condition could use a set of new caps for the pins and possibly the parts that are in the track that the pins go in so they look new i dont understand what the door is called, i can read igh not sure if that a B or a D lol

Give me a Quote for 10 GUIDE PINS (5 1/4" x 1/4") and 2 Pivot Pins ( 5 1/4" x 1/4") ASAP. Thank you, Bobby

For Leigh Full-Vu metal Bi-fold doors (see label photo), the pins & nylon parts are either missing or not holding due to wear, bending, etc. The pivot pins at the fixed ends appear to be fine. Your parts specifically say TOP. My question is whether the bottom pin assemblies that slide are identical ... (cont.)

We have 3 bi fold doors that need repair and one double bifold door that needs repair.They all need new stationary pins, plus the pins with the springs. the double bifold door keeps opening off the track, not sure if it piece that runs across the track is too short.Do we need two pins for each stati ... (cont.)

My door fell off the tracks and is not staying on the track. not sure which pins to purchase to repair. The door has a label that reads: Full-Vu Folding door Leigh Products INC. Coopersville Michigan

I purchased the following parts for my bifold door: 21-062 - pivot 21-054 - guide pin do you have any video's showing how to replace these parts on a Leigh Full-VU bifold metal closet door? Thank you.

I have a small linen closet with bi-fold door (Leigh Full-Vu door part #6956) which is most likely original to the building (from 1960's). The door won't glide along the track on the bottom of the floor - it gets stuck where the screw sticks up in the track. The top pins often come out of the top ... (cont.)

hello I'd like to refresh tired 50 years old metal bi-folds. Could you help me identify the parts shown in the attached pictures? Pictures are top left, top right, bottom right and left. I'd like to replace top and bottom tracks as well. thank you

I need to replace one of these and also need an extra cap. I have the cap identified and in my cart now with floor/ceiling rail attachment clip. this is my second request for parts - i just sent one for the fixed pin that also goes with this set of doors.

Hello, I'm trying to get all the components for a Leigh Full Vu steel bi-fold door. I looked on your website and came across what looked like the parts put wasn't sure. The one product code I found was 21-108 and at the bottom of that page was what looked like the parts I needed. ... (cont.)

Hello,As you can see I have part #21-205 bracket. I am missing the pin that goes with it. Are you able to let me know what part I need? Not sure if the diagram is helpful.Thank you,Eve

Need a "bottom pin" and and two hinges. Don't know manufacturer.Thank youBill