Viewing all customer Discussions for:

S600-23 23" Series 600 Spiral Tilt Window Balance

I have a 23 inch balance 5/8 diameter w a red tip. The window is a patriot 82.

Good Afternoon. I believe i have 9/16 pivot shoe however my original has a screw. does the screw make a difference? I have double tilt window and had recently purchase two balance from you. I am not sure if i have installed balance incorrectly or need new shoes.? it is still tough to push ... (cont.)

...None of which work. I need tension/balancer springs for each. 2 are 36 x 53 2 are 35 3/4 x 53 2 are 29 1/2 x 49 3/4 2 is 36 x 49 3/4 Stickers on windows say Order: 35377 03/06/96 VD2W R Line: #1 I am selling the house and need to fix them ins

My balance has no color tip. What color should I purchase?

wing size sashes: a. Qty [1 pair] 23

I will need two 23" balances (red)requiring 2 brackets (pictured) (two 23" balances) (two 19" balances) all red and 6 brackets (pictured) (two 18" balances) a pair of locking mechanisms (pictured) pivot shoes, photos attached for identification. Measurements, as near as I can ascerta ... (cont.)

The rod is 24" including the metal part sticking out, 5/8" wide. There is a dark blue piece crammed up inside. The dimensions for the shoe are ABOUT 1" x 2" x 1/2" give or take a 16th. This is a tilt window. Would love to buy replacements from your store ASAP, as this is for a military relocation an ... (cont.)

I have a 23 x 3/8" spiral balance without any colored plastic. Each window sash is 50" w x 24" h and is hurricane double thick glass. The windows are heavy to me. I need two spiral balance springs. What do I order? What tool should I get? Thank you...saw you on google.

I have some spiral balances with no tips on the ends no idea what color they should be. The housing is 23" long believe it's 5/8 they came off tilt windows only one sash tilts

This is a 23" window balance with no names, numbers or markings. The top of the balance was secured by a single screw through the cylinder itself. Any help is appreciated

I am looking to replace the tilt balances in a number of windows. Each has a plastic cover over the balance. How do I remove the cover without breaking the channel. Or does the new balance slide inside this cover. I can move the cover a little up and down

the spiral balances on my tilt window won't hold the window up. I have tried to adjust tension but there is no increase in tension when done. The balances are 9/16" diameter and 23" length with red tips, the windows weigh 17 pounds and every window this size has the balances fail should I be using t ... (cont.)

Hi: I need to replace this older spiral window balance. It is not marked, numbered or named at all. It is a Tilt window (vinyl); The only name I find on the window is "Thermo Air 88", no other numbers or other markings. It measures 23.5 inches and has a blue tip; without the white plastic casing the ... (cont.)

I need to identify the correct spiral balance for a tilt in style double hung window. The diameter is 5/8", the tube length is 23", and it has a red tip.

I cannot find anywhere on your site any load capacities for the various color tips on spiral balances. Assume it would be tabular with color and load range ? Load range would be based on use of pair of balances ?

What is the difference between the red verses the blue vinyl tipped spiral balances?

I purchased your spiral balance tool (75-006) to fix some windows that wouldn't stay up. As I got into the project I found I couldn't adjust the tension and one of the balances looked as shown in the pictures below. There was a white tube that enclosed what's in the pictures. That white tube attache ... (cont.)

I need to replace some spiral window balances where the metal spiral has rusted out. The windows are PGT WinGard (series SH 700, I believe - the label says "PGT - Single Hung - SH - 701"). The windows are 10 years old. The metal tube is 23" long (I may need additional lengths as well, as I haven' ... (cont.)

In addition to 15 of your 15-070 Pivot shoes, I need some balances. Your catalog does not give a good guide to what balance I should order. I need four 23" long balances (.54" dia) I am assuming the ones you describe as 5/8". The window weight is 31 lbs. Window was manufactured by thermo guard. ... (cont.)

No Question, Just wanted to take a minute to say thank you for having the balance tubes and the charging tool! We have lived in our house for 8 years and the windows never stayed open unless propped open. I just replaced 12 balances and the windows work great!