Viewing all customer Discussions for:

21-106 Bifold Pin Cap, 3/16" ID

I need spring loaded hardware for bifold metal 1970s closet doors

here is my problem. i have 40 year old metal bi-fold doors in all the closets. they are bolted together so they swing open like a regular door, so i don't use the pins on the mating edge of the doors, only the outside edge. on one door only, i can use the slot on the bottom pin and raise the door ... (cont.)

Hi, I have seven metal, louvered bifold doors (circa 1970). I'm having doors powder-coated, and I would like to order new caps for (I'm unsure of proper nomenclature so I'm calling them) pivot-pins and slide-pins. I hope that you may provide assistance in identifying the correct replacement parts ... (cont.)

Hello, I need replacement parts for my early 1970s steel bifold closet doors. Included are pictures of the parts I need (brackets, pins, caps, ect.). I believe the cap I need is your 21-106 product. Thank you in advance.

HiThe 4 pics included are of an 8' metal bifold in a home I am helping out in. (Elderly folks....). I am not familiar with this type of hardware, and also, I don't see how to remove the old hardware. There are what appear to be brackets welded on to the door and the pins etc seem to be press fitt ... (cont.)

Do you have this? Need spring and top and botton caps

One of our doors needs the plastic/ neoprene pin covers. The doors were installed in our house when it was built in the early 1970's. I've attached a picture of a sticker found on the inside of one of the doors. This is the only identifying information on the doors. Do you sell replacement plast ... (cont.)

Please, I am seeking assistance with completing the hardware for 6 x 24" bifold panel for 3 x 48" closet. I picked up these used doors from a yard sale and would like to install them. I am primarily missing the 3x upper tracks and 6 x pivot/jam bracket (and associated pins). Some of the hardware in ... (cont.)

Good morning,Would you be able to help me out at getting parts for my doorsI have 4 set of doors that are 4 feet and 1 that is 5 feet.I would like to buy the plastic caps for all of them.the pins look like they are 5/16 and the swivel one are also 5/16 but are smaller at the bottom where the cap goe ... (cont.)

hello I am in need for pins for a complete bi-fold door and pivot clamps for them The upper pins I have are the same as 21-065. do you think that the pivot clams 21-154 will work for me

I need to get new plastic pin cap for this particular pin.Please provide parts number. Thank you

The bi-fold door lower guide needs to be replaced. the guide is similar to your bifold door cap. Part no. 21-103. The apart I have is 3/8" where the 21-103 is 1/2". Is there barrel of 3/8".

Looking for those two pieces to replace on an existing door. As I've noticed, other's have the same address to address issues, but no company name and it was pre-internet, so no web address. BUT, BTW: When I search online for "P.O. Box AC, City of Industry"... your site came up. So, do you have ... (cont.)

4 doors that are 18" each for 6' total closet opening I need the plastic tips on the pins (note that the threaded pin has a smaller dia than the other 3 pins where the tip is installed). I also need the track for the top and the mounting brackets (or track) for the bottom of the door and any addit ... (cont.)

Hi, i am looking for hardware for Slimfold Closet door. I sent you the pictures of de model of the door, the top pin and bottom pin. The size of the pin is 5/16 in width. The piece I need is the nylon fit on the bottom pin and the top pin. I need 10 top nylon pieces and 10 bottom nylon pieces . Can ... (cont.)

SWISCO: I'm looking for replacement part(s), assemblies for my original Fenestra metal bi-fold closet doors. The doors are originals from when my Grandparents had the home built in the late 1960s. I need part recommendations for both upper/bottom pivot assemblies, including all pin caps & push nuts ... (cont.)

I'm in an old NYC apartment with older bifolding closet doors. I was trying to make the doors close better, but upon inspection, they are different than bifold closet doors I'm used to. They do not hand at the top, but just roll in a track at top and bottom (pictures are from bottom). The bottom par ... (cont.)

I am looking for a nylon bushing that rides along the bottom track of a mental bi fold closet door. I have added a picture of the bushing and the dimensions. We ordered 2 tracks from you recently (21-403 - 6 foot opening.

I ordered 16 pivot clamps 21-154 tonight. I'm assuming they will work with the pins in my doors. The o/s diameter is 5/16". I'm also needing some pin caps for the 5/16" pins Do you sell these caps individually? If so I'd like to order some. Part #? Thanks for your assistance with this. Terr ... (cont.)

Built in 1970