Viewing all customer Discussions for:

15-087 Coil Housing Pivot

Hello i need help finding a replacement for the above broken pivot shoe. I am unsure maker of the window. Other windows in the house are Regency.

no mark on spring have on mark on lock wherepin from window locks in. (8R)

these are tucked in a very tight space. We have to separate the 2 pcs in order to change them out.

How can I know which springs to order for my window? It is a vinyl replacement 24 x 46 in size. Both coil springs are broken.

I got the shoe and coil spring out. The case has either a 6 or a 9 on it (there's no determination on what side is up). The coil spring itsself snapped and attaches to a clear plastic tab that the shoe clicks onto when the window is all the way up. The shoe came apart easily, so I should just need t ... (cont.)

Hi, need help replacing the constant force spring assembly. The window weight is 30 pounds, so I'm looking at the 15-lb/pd/series-140-quick-tilt-balance which looks totally different from what I have I also need the rounded pivot bar. Is there any parts I need for attaching?

I believe this is called a constant force spring.It is broken in one of my other windows and I need to replace it.

Hi, I attempted to go in and remove the window balance hardware but ran into some issues. As you can see from the photos, the spring has snapped off from the main slider/balance and needs to be replaced. The springs were attached to the hooked aluminum piece (set with philips had screw)...I disattac ... (cont.)

Hello, I have a Traco bathroom window from maybe the early 1990's. The spring has broken. Replacement cassettes might not be a bad idea either. The window measures 27 3/8" wide X 20 15/16" high X 1 1/2" thick. Using my bathroom digital scale it weighs 14 lbs. Any help would be greatly appreciated, ... (cont.)

Hello hope all is well I'm looking for this part for both side R &L with spring . Thank you Exp-pro glass

I have a window can not find name on . the balancer is broken the metal cam . It doesn't look like it will com apart to replace the cam not sure ? Want to know if you have a good idea which will work

Kensington window parts

I need one of these parts i have no idea what it is i just know how to fix it. My customers one snapped and i need a new one.

Hi, I have a Home Depot 8501E Window - This was mounted in a bathroom shower, and the pivot lock shoe mechanisms and lower window sash "pivot tabs" on the lower corners of the sash have rusted away. Can you help me find replacement parts? This balance mechanism seems to be a "tape" of some sort sec ... (cont.)

I'm just trying to find the best quick-tilt replacement for two windows. Each are the same size. The original window manufacturer is long gone. I think replacement sets of the S140-6 will work. I just wanted to verify. Window Pane Weight: 11 lbs 13 oz Track Depth: 5/16 inch Track Width: 1 9/32 I ... (cont.)

The only number I see on this part is the # 6, there are no other markings. if you have themI would like to order 4 right and 3 left thank you.

The old pivot pin rusted into the shoe. I need a left and right assembly. It measures about 9/16" thick.

what are these and how do you replace them?

Please identify.

Can you tell us the number stamped on each coil? This will allow us to better recommend replacement options for you. As far as the housing goes, take a look at our 15-087