Viewing all customer Discussions for:

15-087 Coil Housing Pivot

The sashes seem to weigh (I only have bathroom scale) about 27 lbs each. I have about 35 of these Gorell sashes with coil balance problem. I?d rather rebuild than replace them. Please let me know what you think. Do you have an installation viideo to help me get the first install done right? Tha ... (cont.)

Hello, I need to replace two broken sash support coil balances and worn coil housing pivots for both sides of a small bathroom window, please. The upper tilting window that needs the replacement parts weighs 13 pounds. The old broken spring coil balances are 15/32" wide. As seen in the attached ... (cont.)

How do I know what weight coil to order? On the end mine are etched 7 CB ( mine are broken ) my original widths are a half inch wide with 2 holes on the end. Looking at your site I would guess I need part 15-087 Coil housing pivot shoe and the series 180 coil balance. Please confirm on both of my a ... (cont.)

Please refer to cavity dimensions to help with selection of devise that may work in our situation. t Thanks , Bill

Had 2 coil balances break on an Anderson window today.It looks like the coils are stamped 5 BD or DD and they measure 15/16" wide.The sash weighs 20 pounds 8 ounces.They look like your series 180 coil balances.Would the 5 pound be the correct one?Would the 15-086 tandem coil housing and the 15-087 c ... (cont.)

thanks and finally i need this piece that attached to the other end of the spring.i think this is the right mounting bracket.https://www.swisco.com/Mounting-Bracket/pd/Sash-Support-Coil-Balance-Accessories/16-024

the only numbers i could find were the following: 1257801 52-8506-wht

I need a replacement balancer and tilt bar with plastic housing. The bar has sheared due to rust and I?m unable to remove it from the shoe.

I finally opened one of the windows and it seems that the pivot bar is missing on one side....

Gorell 5305 double hung windows Both coils broke . They have Stamp into coil 8 AE near the top by the 2 holes

First two photos are located on the right side of the window and are the broken parts. The third photo is located on the left side of the window is in good condition, and Not Broken. The actual size of the good part is 7 inches height, by 1 inch width. The window itself would not slide up due t ... (cont.)

This whole system is rusted and missing in our bathroom window. I am looking to replace it. Here is a similar window with a working window balance. There is one picture from the bottom that shoes the blue piece that holds the pivot bar and one picture from the top. The markings I found say PAT 35354 ... (cont.)

Looking for a replacement part for this. I have one, the other one is missing. Any help would be appreciated. Thanks Brian

the window is 44 pounds, vinyl frame. the existing balances appear to be 35/64" deep by 1- 17/64" wide with 3 coils. I inadvertently damaged them while installing the window. Have been unable to contact Crestline. I need 2 pair, plus do you have a spreader tool to remove/install them? Thank you, ... (cont.)

I need the coil window spring balance with 1/2 high 2 1/2 my # 917

looking for spring pivot shoe.

I need qty 2 of the part in the attachment.

I need a sash lock and balances for some Gorell windows. The Gorell model # is 5155 and measures 23X59. Please see attached photos.

Hi I am trying to replace the pictured part. It has a coil on top and a shoe at that bottom. I think it is all one part. It holds a heavy double hung tilt window up. There was only one coil when I removed. Can you help identify and suggest a replacement part?

I was cleaning my window and (as I've learned later), probably didn't lift my window enough and think I've broken this part. I need to replace it but don't even know what to search. I also can't even get the window back in at this point so it's a bit urgent!