Viewing all customer Discussions for:

15-087 Coil Housing Pivot

I need a replacement balancer and tilt bar with plastic housing. The bar has sheared due to rust and I?m unable to remove it from the shoe.

I finally opened one of the windows and it seems that the pivot bar is missing on one side....

Gorell 5305 double hung windows Both coils broke . They have Stamp into coil 8 AE near the top by the 2 holes

First two photos are located on the right side of the window and are the broken parts. The third photo is located on the left side of the window is in good condition, and Not Broken. The actual size of the good part is 7 inches height, by 1 inch width. The window itself would not slide up due t ... (cont.)

This whole system is rusted and missing in our bathroom window. I am looking to replace it. Here is a similar window with a working window balance. There is one picture from the bottom that shoes the blue piece that holds the pivot bar and one picture from the top. The markings I found say PAT 35354 ... (cont.)

Looking for a replacement part for this. I have one, the other one is missing. Any help would be appreciated. Thanks Brian

the window is 44 pounds, vinyl frame. the existing balances appear to be 35/64" deep by 1- 17/64" wide with 3 coils. I inadvertently damaged them while installing the window. Have been unable to contact Crestline. I need 2 pair, plus do you have a spreader tool to remove/install them? Thank you, ... (cont.)

I need the coil window spring balance with 1/2 high 2 1/2 my # 917

looking for spring pivot shoe.

I need qty 2 of the part in the attachment.

I need a sash lock and balances for some Gorell windows. The Gorell model # is 5155 and measures 23X59. Please see attached photos.

Hi I am trying to replace the pictured part. It has a coil on top and a shoe at that bottom. I think it is all one part. It holds a heavy double hung tilt window up. There was only one coil when I removed. Can you help identify and suggest a replacement part?

I was cleaning my window and (as I've learned later), probably didn't lift my window enough and think I've broken this part. I need to replace it but don't even know what to search. I also can't even get the window back in at this point so it's a bit urgent!

Traco vinyl window 36 x 48Bottom sash weights 22# Need both sides for bottom sash Top spring 6FA Bottom spring 5GA All springs(4), housings, 2 short, 2 long with pivots Thank you Charlie

How I know the pressure of spring

Please help me locate this part.Pat5,353,548 stamped on side.Two of the tandem housings are marked 7 and end housing is marked 8.I need the coil springs also

I have a broken spring in a sash support coil balance. The housing looks like a 15-087 and the spring looks like a S180. The housing has the number 5 printed on it; does this mean the spring is a 5 lb spring? (pictures attached) Thank you for your time.

I need 4 pairs of these for 4 windows. Can you send cost etc.

Attached are the parts of double hung window manufactured by survivor window

Hello there. I have a coil balance that has broken and need help identifying the replacement parts. Of note, there is no cutout in the vinyl track. I've even removed the top cap and no cutout up there either. Any pointers on which replacement coil I need, and how to get the shoe out of the track? ... (cont.)