Viewing all customer Discussions for:

S795-34 34" Series 795 Channel Balance

On the metal channel is stamped 34B. I will need all the parts. The latches, the channel balance, and the shoes. Let me know if you have any of the parts in stock.

Replacement window parts. Broken plastic " Ball", which supports attaches toballast

I need sash balances and shoes. The old oles are stamped 34B. Can you please help me locate the correct replacements.

Need plain channel balance for a 2007 Jeld Wen single hung window. Descriptions below: Etched in glass pane: Jeld Wen 20070415-00027-5317MZJW 01-08 LOW-EALI-MZ ASTM E 774 Sticker on side of sash: Part 0743499Vent panel 29.5 x 35 9/167085V SHNF WHT cam lock DP R-50

Quantity 16 7S953 -34B 15-198 hook 15-194 t- lock

Hello, I am looking for replacement channel balances which I think I have figured out from your site. The markings on the broken channel are 34B per the photo. The channel measures about 1/2 inch wide and the T-lock is 1 inch wide. This also has the balance clip per the photo. I would need six of th ... (cont.)

Below are pictures and descriptions of my window balances. The plastic parts / pulleys have become brittle and are breaking. I hope with this information you can help me with replacements. I have 6 windows, (12 balances), that I want to go ahead and replace at this time that are all the same as d ... (cont.)

Looking for a few balances like the one in the photos. The shoe that at the house all black not gray like the one in the photos. Looking a quote for 4 - 34C 1 - 28C 1 - 34F 1 - 34D The one in the photo is the sample of the 34C

I'm 80% sure this is a 34" 770 series channel balance with a 1 1/4" shoe at the end. 34C is the stamp on it for the weight. Can you confirm or tell me what I need to replace this balance? Thanks so so much!

As you can see I need this size with the top clip and green shoes 1 inch. looking at 34 total this size and 2 more would be 34b bsi I know we could use the s795 but then we would have to make screw holes in all the windows

Hi, looking for the correct bouncers for my window the Total metal length is 34 inches. Thank you for any help you can provide. Your team has been great for me in the past. Thanks, robert

Can you give me a price for S795 balance with 15-194 shoe and 15-198 hook. I need 4. Thanks

Hello,I'm looking to purchase several sets of balances for my windows but want to make sure the measurements are correct. I have them at 34.75inch tall balances to the top of the plastic tubes which looks different than the balances in your videos. Please see attached pictures. It makes me unsure of ... (cont.)

Hi, I recently ordered replacement channel balance, and the clips at the top look different. It looks like the existing balances are clipped into the holes at the top, but the new ones look like they need to be screwed in. I was hoping someone could provide some advice as to how I install the new ... (cont.)

From the conversation that I had with your representative he explained to me that this window balance would need to be custom made. I also would need 2 window balance w/ any hardware that I would need to install the window balances. Can I get the cost of the parts. Thank you

Need to replace whole rod

It is 34 inches long has numbers and letters 34D R BSI on the side. The window is 3x6. Bottoms folds open.

Good Afternoon, I am looking to purchase (2) S795-34 balances, but will need the hook installed instead of the tab, and a 15-194 shoe, as mine measures 1". Stamp on my balance is 34B. Thank you!

can you please advise if you have springs that will fit my windows? Numbers on the spring is: 34 C and looks like a BS1 (not sure if 1 or i or L) 34" long and 1/2" square

The metal part of balance is 33", overall is 35". The actual window Is 35"x30". Can't find this balance anywhere