Viewing all customer Discussions for:

15-179 Pivot Lock Shoe, 9/16" Thick

I am thinking part# 15-167 or 15-179 patent# 4,610,108 only number on it.

On the glass, it says AWS.

WINDOW(Vinyl) MFR Code:AAMA JW-12 Series 79/79J SH TILT AAMA/NWWDA 101/1.S. 2-97 H-R15-44X77 H-R25-44X77 Hello, The Pivot Lock Shoe is similar to Model# 15-179, but the Metal Cam is difference.Can you find me the Part Number? Thank you very much. MY Kwan

Can someone identify this part.

Dear helpful Swisco people, We need to replace block and tackle channel balances (more on that later) and some pivot shoes. I would like a shoe that allows the window not just to tilt, as we have now, but also to allow us to lift the window out. As they are, we have to unscrew the pivot bar, sli ... (cont.)

I have a MI window foe my all windows.Some of the windows do not close completely and so I need to replace the Channel Balance. I have attached the pictures of Bottom, Center and Upper part of channel balance. Please help me identify that which channel balance i can use to replace. Thank you, ... (cont.)

Do you have this pivot shoe

Hi I have your 15-179 spiral balance lock shoe. The pivot bar on the existing window will not fit. I took several of the spiral balance hangers off of the 15-179 and put them into the old lock shoes. This worked until I broke one of the pivot bars. Now I need a bar that will fit the 15-179 lock shoe ... (cont.)

PATENT # US4610108 WE NEED 12 IF THEY ARE AVAILABLE.

Trying to replace shoes spiral balances and pivot pins . Shoes are 3/4 in thick thank you Joe

Trying to find the correct part number. The dimmensions are 1" wide 1/2" deep 2 1/8" high. I have attached a picture.

The balance is 28" long and 3/8 diameter The plastic pivot shoe is 7/8 wide and 1/2inch thick and inside diameter is 3/4 inch I have five vinyl clad windows and need 5 sets. One lumber supply company thinks these are Croft windows. The track home was build in 2003.

Please help me find shoes.

I have no numbers outside of the KC on the window double hung. I have 16 of these broken in the house and will have to get measurements for exact part size. I have ordered the Jamb Spreaders so I can get one out to measure. If you think from pic you can match please send me one and I will try it. ... (cont.)

I have a window that has been difficult to open and close. Recently when trying to close the window I heard something pop and some plastic fall. After inspecting and googling a bit I found that I had a broken balance shoe and learned how to remove it. I located this website but I'm not quite sure wh ... (cont.)

The windows are Superseal tilt windows that are no longer made. The channel is 1 1/4 in. The balance shoe is in the channel and there is no cut out to remove it. The picture is of one that is intact. The top metal piece is broken and I want to know if there is a replacement that will fit to hook the ... (cont.)

I have several windows that I am needing to replace the pivot lock shoe on. I have attached a picture. Do you have this replacement part?

We just bought a 2007 home 2500miles from where I'm used to living. 5 windows of an unknown manufacturer don't stay up. Some hinge part is broken and the twisty channel thing is snapped on at least one. We did manage to locate one "handyman" for the area who stopped by and said I needed to buy wh ... (cont.)

I have two identically sized windows side by side. I replaced the pivot shoes for the first window using the 15-179 pivot shoe. Pivot shoe fit fine in the sash and with the original pivot bar and all worked well. The Pivot bar is identical to 26-021 model. Oddly the other window which is iden ... (cont.)

I have a pivot lock shoe that is binding enough to break off my metal pivot. I have sprayed teflon spray in an attempt to get it move more freely with minimal success. Is there a better way to free up shoe where it will operate properly again? The channel balance seems to be working fine on its on. ... (cont.)