Viewing all customer Discussions for:

S380-35 35" Series 380 Channel Balance

I have Series 380, 35" with a 38# rating stamped on both broken balances. Caldwell. Need help identifying the sash guide part number, plus any parts I'm not seeing that I will need. Thx!

I have a 35 inch balance with the numbers, 3405 on it and r002. The windows are 20 years old. I included some pictures, hoping they would help. Can you tell what size I need to replace them?

I need new Channel Springs for my HARCAR windows. They are all 35 inch long and 1/2 inch wide channel box springs and the only markings I see on an old one is 343 B1. Pictures attached

35" Long on the channel, 1/2 wide, 34 4 Caldwell KL 3 ea 14 4? (stamp is faded) Caldwell BM 3ea

I am replacing the balancers of my 30 year old windows. According to the selection chart the balancer that fits my window is an S380, 35" tall. The balancer has no numeric indication so I weight the sash and it weights 29.2 #. Should I go with the 3440 23-30# or the 3450 30-34#. What would be the di ... (cont.)

Need help finding parts . Send pictures hopefully that will help identify the part . Thank you Chris.

Need 6 - 35 in -by 5/8" block & tackle

I have a broken sash channel balance I need to replace. This from mid-1980s gapco window. What would be a correct part?

#3435 Thank you in advance. Cory

Block and tackle with spring, 35" by 1/2" channel. Markings read 3440 BSI LM

They are 35" long

I need to get 8 of this Channel Balance for 4 Nuair windows. Also I need to see what other parts you stock for the replacement like the plastic spacer that go in the hole in the window edge or top bottom part the Channel Balance locks into to lift the window.

Channel length is 34 inches Stamp reads 3435 Manufacturer is unknown Six (6) balances are needed This home was custom built in 2001.

I'm looking to make sure I get the correct window channel balances. Please let me know as I need to replace as soon as possible.

Hi, please help me to order the right parts. They measure 35" in length. On the balance is printed 34-4 IX CMC 11. Thanks

Hi there. I need some channel balances. The old ones are 39-4 and the window weighs about 40 lbs. which ones should I get. I need 1/2" with wings too. Thank you.

I have 1/2 wide mechanism with numbers 08 G04 3440

I would like to place an order as follows:Quantity 2 channel balance 35 inch code 34 4 FV CMCQuantity 4 sash guidesQuantity 2. Take out clipsI uploaded the photos.Dean

Hello looking to replace two balances on a NuAir window. Both balances have failed and got one out for photos.

Hi Swisco,I followed the steps on your video and took the photos you recommended. They are attached. Photo 7944 also shows the markings which read "3430" with a "c" also visible but separate. The metal part of the channel is 35" exactly. I'd like to order one set of the correct replacement parts.Tha ... (cont.)