Viewing all customer Discussions for:

S380-35 35" Series 380 Channel Balance

Everything matches, but I am concerned that the shoe depth is 1 inch on this model -- where shoe depth is measuring 7/8" (maybe 15/16 at the most).

I need 8 replacement 30" channel balances matching the attached photos

35" 9/16"

The only markings are 34 2 FW CMC 4.

I need four of the channel balances mark 29-6 and I need eight of the channel balances marked 34-9. I also need eight of the small plastic pieces of the last picture enclosed

I have Lawson windows installed when my home was built 13 years ago. I am trying to find the correct balance. The channel is marked 34DS48L. What size and weight do I need?? Thanks RJ

Balance is stamped "3440". The metal part is 35" long, it is 5/8" deep, and 9/16" wide.

I need to replace my window balance. Length of metal channel- 35inches Width - 9/16 Weight of sash -28lbs I've included photos of the balance below.

Metal is 35"Sash Weight is 34.5 lbsJay

Metal portion of balancer. 35" Weight of sash. 34.5 lbs Need 2 new ones. Thanks for your help.

I believe this is 35" Series 380 Channel Balance S380-35 / Option: 3440 Am I right?

Hello! Help me find the correct model.

I'd like to replace the window balances in 3 windows. All have the same top and bottom plastic parts. The photos are of the longest at 37" with 3640 stamped on it. I have a 35" with 34-9 FA2 CMC 13 stamped on it. Then a 30" with 29-91675 stamped on it.

Attached are pictures of the broken channel balance on my Nuair window. The balance is 35 inches long without the nylon attachments and has no marking on it. The botton side of the balance is 1 inch wide with the nylon attahment. The window pane weighs 22.3lbs. I selected balance #S350-35 with opti ... (cont.)

I need a few pieces to help me get the windows fixed in a house we are getting ready to sell. Two sets of two springs each. Here is what I know:Set 1: 30" long with no numbers printed on or stamped into the balancing rod. They are 1/2' wide. It is from a window that is a single pane 30' by 48'. I a ... (cont.)

The Channel Balance is stuck in the up position. Nuair window, installed 2007 The window dimensions are top to bottom 70inches from side to side 35inches. The third image is from a functioning channel balance but different window size, I included because the needed part would probably be similar ... (cont.)

"3420" is stamped on the side. I can't tell if I should get the 350, 351 or 390 series. The shoe is 1" long and wide. Looking to replace at least 4 channel balances.

Hi, Based upon the shoe depth, I assume this is a 380 series window balance. However I could not find a 3490 code for this listed in your selections ? Unsure what to order.

I am looking to identify this part and get one ordered to replace for my window. The full metal length of the part is 35 inches. Thank you.

Hi, i am new in this, what should the replacement part be? Is 35 inch long