Viewing all customer Discussions for:

S380-34 34" Series 380 Channel Balance

Stamp on existing channel is: 33 9 ON BSIWindow is double hung non-tilt aluminum frame double pane insulated window.Total measurement is 34" wide x 70" tall. Bottom window sash weighs 28 lbs.I think the 34"Series 385 Chanel Balance Option 3350 could be the correct one for me to order. Please look ... (cont.)

Please recommend replacement parts. Thank you.

The stamping making is 29 per photo, the total metal stem is 30 inches. Which part number should I order? Also do you sell the clip that goes into the window side, as I am missing one? I also need to order similar with the stamp marked as 33 and the metal length is 34 with similar ends per attache ... (cont.)

the stamp on my window spring read "3340 BSI NN". need two of this.

These are 34" x 1/2"

Number on rail 33.5 smaller #bs1 inside channel of rail approx 1/2 length 34" without end cap. End 2-3 is 1" long side tabs are approx. 15/16s, end 1-2 is 1 1/2" long - Jim Will be buying 2 possibly more after to checking other windows

Please give me your Product Code for replacing 3330 channel balancers. The stamp on the old balancer is 3330 BSI. The channel length is 34". Thank you.

Looking for replacement balance for several windows in my house. The original channel balances are stamped 33 3 CALDWELL HM. These are 1/2 inch wide by 34 inches long. See attached pictures of plastic attachments and metal clip.

Hello again, this is PART 2 of my photo upload. The metal Channel measures 34 inches. This measurement is steel channel only and does not include plastic tips. Thanks so much! Oliver Bewsey

Looking for these slides or balances. Metal part is 34" long, the shoe is 1" depth. And the top

Length of metal channel is 34", marking as in photo, caldwell 33 3 HO. Weight of window removed and weighed is 20.5 lbs. Winged end pieces as shown in photo. If you can tell me exactly what to order, it will be much appreciated, Thank you, Ed

Looking for replacement balances for my windows. Numbers on channel balance is 33-3. Needing 12.

channel balance 34 inches, BSI 3340.

This channel balance is for a non tilt window. Could you please help me identify which part this is? It's 9/16" wide and has the marking '33 3BSI NG' on it.

Hope you can see the stamp on these. Our windows weight from 18 pounds to around 30 pounds. They're all the same length but different widths. Not quite sure what to get. Thanks.

This assembly is 34 inches long (metal part only) and 9/16 inches wide.

These balance channels are from a CWS Model #3500 single hung window. The channels not including the plastic ends are 34" long x 9/16 deep x 9/16 wide. Let me know if you need more pictures and or descriptions. Thank You.

Hi. Need part number for no-tilt window channel balance. It has an imprinted label that says 3350 BE B.S.I. Its depth is 5/8" and length is 34". I need two of them for both sides of the window. Please see pictures attached for further information. Can you kindly help?Ali

Channel is 9/16 wide and 34" long. End of channel to end of channel. It is stamped with 3390 33. It comes from a Jeldwin window Vertical sash only, no tilt. Please give me a price for 3 sash balance sets. I need to replace on 3 windows.

I have ordered the S380-34 and it came in 1" shorter than the current one it has stamped on it 3330. Is this an error in shipment or is this the correct channel balance replacement?