Viewing all customer Discussions for:

S380-34 34" Series 380 Channel Balance

Balance springs for single hung window .5" x 34"

Hello, I tried to identify my channel balances for non tilt window but nothing written on my old channel balances, the length I measure only the metal part is around 34". Attached is the pictures hope will help to identify the part. Please let me know if you need more information from me.Thank you.B ... (cont.)

Order #2, Job name Cerise

My son purchased a townhome that's in need of new window balances. The bottom balance plastic ends have been virtually destroyed. I managed to salvage part of what appears to be the bottom of the balance.A number stamped on the back of the balance is 33400 with "B.S.I." stamped next to the number. ... (cont.)

Metal length 34inch Please give me series part, thanks. Pinglee

printed on one channel is "33 4 AX CMC 7" channel length= 34" channel height= 5/8"

Need a window channel..can see to find any

I'm looking for (2) window balances like this. Measured 34" without the plastic end pieces.

The attached photos show a damaged balancer for my single hung non-tilting window. The balancer metal length is 34 inches, the cross section is approximately 9/16 x 5/8. The window size is a 4'5"x6'0" window manufactured by Flesher Windows, which is now part of Eastern Architectural Systems. The ... (cont.)

Hi, I know I need a Series 380 channel balance that's 34 inches long (the metal part, as measured). However, my window is 55 lbs -- a really big one. It's a Milgaurd. Your site only shows product for an S380 up to 39 lbs. Can you get me a stronger one? Pictures attached show the current balanc ... (cont.)

Hi, I am trying to see what part number I need to purchase to get the correct replacement. I was only able to find 33 length.

I need 2 different lengths and weight tolerances. The first ones are1/2 in wide and 34 inches long with wings and have 33 3 CO Caldwell printed on the side. The second ones are the same width with wings and are 28 inches by 1/2 inches and have 27 4 FP Caldwell printed on them. I tried but can't f ... (cont.)

The metal to metal length is 34", it is a series 385. The weight of my window is 40lbs.

Please let me know if you need more or better photos. Thanks again.

Hello, The stamp on my channel balance says 33 6 AW CMC 2. Which size should I get? The length is 34 inches and the width is 1/2 inch. Thanks

Hello I have already replaced one of my channel balances and now have had a second one on the same window fail. I replaced the second one with your 385 34" 3320. After install I quickly realized that the 3320 was not the correct strength. (I thought that is what the original was) The sash weighs 33l ... (cont.)

I need to replace my window channel balance. I have three windows. I took 4 pictures. Please let me know the cost of 1 window, shipping cost and shipping time.

Need replacement for the item in the picture 34 inch × 1/2 inch(bit more than 1/2 inch)

Please help identify proper balance for vinyl single open vertical window. Channel width is ~5/8". The channel length from metal to metal measures 34" but markings say #3330. Open and close these kitchen windows many times so these balances have been replaced multiple times. The strings in the pul ... (cont.)

3330