Viewing all customer Discussions for:

15-182 Balance Bushing

Do you have this part?

Coil Springs do not have any identifying marks Dimensions of the coil assembly with coil is 1-1/4" wide; 2-15/16" length; depth 1/2" Sash weighs 18.9 pounds Windows are about 12 years old. No markings. Oddly - identical windows sashes and weights - some had 1 coil others had 2.

I can't find a number (although I'm not sure where to look). The coils on both sides are broken in the middle, although the window seemed to stay up okay with just one coil. The window is relatively small and light weight. Thanks for helping find the right coil to order!

I have MI windows. Series 380 DH; H-R25-47x73; AAMA NWWDA 101/I.S. 2-97. They are double hung, each part can tilt inward for cleaning. It appears that both bottom (top window) plastic hinge parts are broken. Need both R and L ones.

Have 5 broken need a few extra

The stamp on the coil looks like 932 or 902. I am pretty sure the first number is a 9 and not an 8. Photo attached Bob MSI

Hello,I am looking to repair or replace both top and bottom window balances. I have included pics of the balance . The only marking that I could locate is the #7 on the lower balance. Thanks, Carl

3 windows are the same balancer types 2 have single spring balancers these windows are approximately 27 1/2 x 33 inches Vinal windows the larger one is approximately 37 x 49 inches also vinyl window this would take 4 bar shoes as in pics. 6 balancers??-2 with double springs and coil inserts and 4 w ... (cont.)

H-R25-46*77

I need the right part to order for my mi window...the coil spring that holds the window open broke. I took the window off and the broken spring has 932 stamped on it.

We have one window with a sash that will not remain open when engaged. Please advise which model number is needed for replacement.

I have several double hung vinyl windows where one or both pivot locks are broken. I tried uploading picture but your red button doesn't do anything. I don't know the window make or brand. They're coil sashes. I found a patent number on one of the pivot locks: 4.610.108. Can you help me identify ... (cont.)

I just wanted to make sure I get the right replacement parts for my windows as shown in the attached pictures. Also, I wanted to find out if the 5 LB SERIES 140 QUICK-TILT, SINGLE would work since the measurements seem close enough to the ones I'm replacing. The pivot shoe from my window is about ... (cont.)

Hey, need some advice on how to handle two single hung windows that fall when lowered down. They don't fall fast, as if they had broken connections, it's just that they close on their own and won't stay up. I never had a problem with them until a glass company changed the glass in them. I was first ... (cont.)

Window installer called it boot but maybe it is a shoe? It's the thing on inside of frame that allows window to go up/down and perhaps valances the window.

Window in my house had coil balances both sides. They have broken and window has no balance. 3485 right side (inside house)3482 right top piece 3480 left top piece. I am not an expert on coils but I think this had a double coil both sides. The original window was a Capitol Windows and Doors 8500 ... (cont.)

Photos are of the left spring mounted and the right (broken) dismounted. The windiw is 36 x 30.

Vinyl window replacement parts needed for tiltout Windows installed in 1995.

The coils have 440 stamped on them. Can you steer me in the right direction? Thank you very much!!!!!

Looking for want replacement part I need to buy for a MI window coil spring. On one side of the window, the spring broke and the window will not stay open. Picture is of the coil balance on the working side of the window. I would be fine buying just the metal coil itself, but do not know how to d ... (cont.)