Viewing all customer Discussions for:

18-166 5/8" Top Sash Guide, Kinco

IMG_5702 is a take-out clip IMG_5701 (broken in 2 pieces) fits into the top corners of the sash (vent)

Good morning. Last night I changed my window channel balances from one window to another and I could not be any prouder of myself. :-) Now I need to buy new ones for the other window. I took a picture of the # on the channel balance itself and it states 28 4 with some other letters or numbers that I ... (cont.)

34 4 kw cmc 7 35 inch balance 27 lb. window Won't stay up. The balances are not staying in window.Only thing on back of balance is a metal clip at bottom of balance.

Please quote for clips live in Grenada

Here are some photos of the parts I need. The balances are marked 29 3 BSL 0L. The bottom guides are 9/16 x 1-1/32 and the sash guides are 5/8 x 1.54. Can you tell me which part numbers to order?

Attached are photos of the channels removed. 30? long, look just like 380s, except the top is flat. Came on Kinco window, weigh 30.5 lbs. Please devise.

I am looking for 2 new channel balancers. I bought 18-166 : 5/8" Top Sash Guide, Kinco and they looked close but the first 2 were ruined because the balancers were stuck. Could you confirm I have the correct top sash guides and identify the proper balancer for this application. The window is 50 ... (cont.)

I am looking to see if you have this part in stock? Please see attached photos and advise. Thank you

Window is a Lawson, non-tilt. the shown part dimensions match up to Product No. 18-044. Thank you for your help.

I am noticing that I need new window sash channel balance but also I noticed that the piece on the actual window that hold the balances are also broken. I?m not sure what the name is. Also I measured the length using a tape measure when using that I cane up with 30in but the number on the sash bal ... (cont.)

Hope you can open my three pictures and identify these parts. Appears to be a two component system. If needed please tell me which dimensions you require to ID Thank you, Charlie C

The cord on one of my channel balances broke, and the plastic at the top of another channel balance is broken. Can you tell me which balance and top I need to order based on the photos I attached? The channel is 1/2 inch wide, and the windows are non-tilt. The channel is stamped with "28 3 CALDWE ... (cont.)

Hello, I'm looking to replace these. The balance measures 37 inches, metal to metal and is stamped with 3620. As for the balance ends and top sash guide, I could use a hand

Parts needed THank Home Corp.

Window sash balancer retainer I need 4

These plastic parts help the windows to open properly and keep open.

To Whom it May Concern, I am replacing (20) 30" Channel Balances (S380-30/ 19-005 top attached & 15-005 shoe attached). But, I need the top sash guide for the windows. Please see attached picture and advice. Thank you, Edward

Im struggling to find the replacement clips for my windows, the channel balances have finally broke the tops off them and i would like to get them working again. I have 2 windows currently like this so i would need 4 total Thanks for any help Terry MFG: Kinco LTD

Hi, I just order 7 of your balance springs and they work great. However, 1 of my windows has a broken sash guide/clip. Do you have this? I have other pictures and measurements, but could only upload 5 pictures

need top sash guides series mark 40/50 hp aama/nwwda 101/i.s. 2/97 h-lc 30-53-96 h-lc 30*/50*_53x63