Viewing all customer Discussions for:

18-166 5/8" Top Sash Guide, Kinco

I need to replace the channel balances on a couple of my windows. The model number of the window is Mark 40/50 STD Fin (pic included), the channel balance is 30 inches long and has a marking of 29 4 BS1 or BSI and it looks like 11 after it. I also need a top cap and it appears to be a plastic piece ... (cont.)

I have several windows of various sizes (installed 2002) that have broken Channel/Sash Guide clips. But which ones are they? The channel guides have 29 4 NL BSI stamped on the side. Pics are attached of a window with one remaining guide in place and the other broken. Please help. Thx in advance. D ... (cont.)

Could you please help me identify the correct parts based on the stamp on the balance. The stamp is 29 4 BS.L MH I'm not sure why this has 29 on it because when I measured it the measurements were 30' x 1/2 x 5/8 so I'm torn between 29 inch or 30 inch. I need the numbers for all the parts in m ... (cont.)

Kinco windows originally installed in 2002. Channel Balance is 30" long. There is a stamp 29 4 and then it looks like B1. Can you help me figure out which one I need. Also, any help on what top sash guide? They were plastic and broke. Thanks for your help.

Hello; I need

I have taken all the dimensions and compared the parts and the main concern is identifying the top balance piece. I think that it's a 19-005 but your part comes to a point at the end while my part is flat at the end (all other dimensions matched). I believe the balances that I need to order are Se ... (cont.)

Hello, I have windows that are approx. 9 years old bearing the labels: Series:Mark 40/50 Premium STD - AAMA/NWWDA 101/ I.S. 2-97 - H-LC25/35-52X96. The retainers that keep the spring loaded balance are breaking at the top and allowing the balance to move out of the window. Need replacement caps ( ... (cont.)

I could not find the top channel guide in your inventory. Can you help me decide which one would work.

We are looking for parts for three Kenco windows. We have a 29" balance and are looking for - 2 springs and 6 retainers that screw onto the top of the window. I have a few more photos than what is attached and can send them if needed. Series Mark 40/50.

Hi, I'm having trouble finding the replacement parts for my sash window balance. The balance is 1/2'' wide. I would also need to purchase the shoes, top, and sash guide. Hopefully the shoes and top are standard replacement, the sash guide is very difficult to identify, so I've included some photo ... (cont.)

Swisco my friends i build windows and doors. i would like to use your balances in my widows. im looking for hardware that can be used to make these hidden balances to work with my new windows, but also to retro fit old stuff like the clips to remove the sash and reinstall to work with old and ... (cont.)

hi, i have brought 29" Series 390 Channel Balance Product Code: S390-29 (2830) to repair my window from your website. During my installation I found the top sash guide had broken. but i don't know which size can compatible with my new channel balance. Can you help me.

This is for a Milgard window. The length is 33" and the channel width is 1/2". The window weighs 24 pounds. I think I need the 33" Series 385, but I am unsure which option to choose. I also need replacement top sash guides, but was unable to locate a matching one in your online catalog. I will ... (cont.)

I have used the 18-166 to replace the broken ones, however, it seems that the plastic 18-166 was not strong enough. Can I use Aluminum Top Sash Guide, 18-010? or if you have other better ones. Thanks, Vince

I need help to identify the top sash channel balance guide, I'm in the process to repair all the windows in my house and all of then has one top broken and I'm going to replace both tops in all windows. I'm attaching the pictures of the top. I appreciate if you can help me to identify the corr ... (cont.)

Dear Swisco, Can you determine whether the shoe in these pics is the 15-005 or 15-004? Based on this, I have determined that I need either the Series 380-30 or 385-30 channel balance. Thank you.

The top plastic part between the window and the chat her is broken, please send replacement Agnes

Hello Can you help me to find the part that I sent you in the picture. that part I used for double pane window it goes in the top 2 corners. Thank you.

Dear Swisco, I need to repair my windows and hope you can help. Here are the pictures of my window parts. Thank you. Eddy

Do you recommend periodic lubrication in the tracks of a Kinco type aluminum window and if so what should I use? Thanks