Viewing all customer Discussions for:

39-529 Truth Hardware Track Slider

looking for a crank operator for a 2020 jeld wen siteline ex. When standing inside, the hinge is on the left

I saw TRUTH 30744 as part of the hardware but there is no marking on this operator

Need right and left side. Part has truth on it

I have a Truth 41012 that I need a left and right side replacement for on a casement window. The larger arm is 10 3/4. What part should I replace these with.

I wanted to get this bottom part of the window. I attached 4 pictures. The first 3 are from a different window showing the piece we need and the last one is the window with the missing piece. The window is 14.5 wide

Don't know if this is from a milgard or anderson (or some other window). I removed as much as I could have removed and provided a bunch of pictures.

My installer suggested contacting you. My Preservation bow window (installed 2005) needed significant repairs. He suggested that I may want to replace this small square plastic slider that fits in the track that locks into the pivot arm. He showed us how to do it so we could replace it ourselves.N ... (cont.)

As you can see in the photo, the the first teeth on the gear are pretty worn making the window difficult to operate. It has gotten stripped over time because the crank operates in the opposite direction that most feel it should. Any chance you can help me order a replacement? I live on an island wi ... (cont.)

Hello: I am in need of replacing the casement dual arm operator for my Milgard Window. I have attached pictures of the Truth hardware that I have removed. I wanted to verify the parts I believe are needed to replace this unit. 39-253LB 39-529 39-546 39-451 Do I need to replace the stud bracket or c ... (cont.)

Plastic clip that slides along window to close

Worried about a exact replacement because we NO space under the closure currently Thanks Rob

I am looking for replacement hardware for crank window. On the existing part 1/07/19 2339 B.

Need to replace. Teeth on sprocket are worn

I have all casement windows . Needing entire top and bottom hardware. How does one tell if it is right or left? Below are some photos. My house was built in 2007.

Trying to locate this operator. Not sure if I need one without a cover a need to purchase a cover separately. The one I need is all one piece. The arm measures approximately 13 1/2 inches from the base of operator. Also I added a pic showing how the extended arm is connected to the sash. It has a sw ... (cont.)

looking for a replacement bracket that attaches the crank extension arm to the window. It is a small plastic piece that slides into a channel on the bottom of the window and the crank arm snaps into it to allow opening and closing of the window. window model is C-LC50 940x1956 (37x77. Picture is b ... (cont.)

I need to replace all the hardware on several casement windows in my home and i need help identifying the parts i should order.Can you please help me identify which parts i should order based on these photos?If you look at my order history, you can see the parts i already ordered so im hoping you ca ... (cont.)

I am looking for a window crank replacement part. I can't read the part number but I believe it is either 071299 or 071289. I can't find any other numbers. the second picture, the clips to hold my bottom windows in place when raising up or down are broken. I tried to capture the sticker that w ... (cont.)

Hello, we are looking for a left and right casement operator as seen in the picture above. Thank you.

Lost one of these. It slides into the hinge track on a Marvin Casement. Any ideas on a replacement?