Viewing all customer Discussions for:

15-188 Pivot Lock Shoe, 1/2" Thick, Blue Brake

Do you have this part?

This is the cam lock I am looking to match. Sent in the info on the pivot bars Thanks for your help

Hi Swisco, I need to purchase several pivot shoes that will work with the pivot bar in the picture. I previously purchased the 15-135 locking pivot shoe, but my pivot bars do not fit in the cam. Any suggestions on which pivot shoe will work with my pivot bars? t Thanks.

I am looking for 2 small metal parts and 2 plastic couplers that go with a Window made by Slocomb Windows. The Window measurement is 32-1/4 wide and 17-1/2 high. The window is a till window and the metal part goes inside the top of the window and the plastic part go in the window track and conn ... (cont.)

I've narrowed down what I need to your Spiral Pivot Shoe, 1/2" Thick, Blue Break Product Code: 15-188 and 35" Series 900 Spiral Balance Product Code: S900-35, my windows are 20.5 lbs ea (I weighed them) should I go with a white tip or a green tip? Windows are 32"w x 72"t. I plan to order 1 se ... (cont.)

The shoe #15-188 with the blue brake seems to be identical to the one we have removed from our Seasonshield Window Series 5100 (single hung). Can you tell me if that is the correct replacement part?

Can you please tell me the name and part number for the part in the picture?

I am looking for replacement pivot shoe parts Thank you

Pictures show front & back view. Part measures 2 1/8" L x 1 1/4" W x 1/2" D.

Hopefully this has the photo attached. Attached is a picture of the sash support of your Wilmar Dbl hung window from the 1998 era. Tom

Looking for a Pivot Shoe for a Crystal Vinyl Replacement WIndow. The channel is 1 1/2 inches wide and 1/2 inch deep.

Please see attached part. This is the bottom pin for a spring loaded replacement window. If you need further information please contact Thank You, Donna

Which brake shoe would work for me? Blue Brake pad 2-9/16" Long 1-1/4" Wide 9/16" Thick

The last 2 pictures are of the part that is broken. I haven't been able to find that part anywhere & the broken part actually inserts into a plastic housing, as seen in a previous picture. If I can't replace the broken part, is there a replacement part to hold the spiral balance & the sash povot bar ... (cont.)

I am in need of replacement pivot shoes-minimum quantity needed is 20. See uploaded pictures. The dimensions appears to be: 1/2" Thick (Could be 9/16" depending upon where measured) 7/8" Wide 2 1/16" High Please let me know the replacement number and availability. If exact replacements ... (cont.)

I have vinyl double hung tilt windows with theses shoes. The windows are 15 years old and out of some small company out of Canada. Hi-Therm? There are no markings on the windows or any of these parts. The spiral balances are of the 5/8 diameter size. As I measure the dimensions appear to be ... (cont.)

I have a long story but will keep it short. I don't have a brand or model of the replacement windows for the attached photos of cams i need. They are double hung plastic replacement windows which tilt inward so both top and bottom windows can be cleaned from the inside. I need about 2 dozen of t ... (cont.)

I order a spiral bal and pivot shoe 28" 900/ and it recommend a 3/8 think shoe well shoe was to narrow 15-045 ( tilt window) I'm looking at my old one it measure 1 1/4w ,1/2 thick,and 2" long and there is some blue on it. My question is what shoe do you recommend ? These are the two I found on your ... (cont.)

Hello, Do you have a pivot lock shoe that goes with this pivot bar? My window is a 1997 Bonneville Tilt window. Pivot Bar, 3-1/16" Product Code: 26-226 Thanks, Marie

I need two of these. The metal piece that the window peg slides into, is broken. I have included some pictures that may help in the identification. They measure 1/2" thick, not quite 2 1/4" tall and not quite 1 1/4" wide. I also need 1 Charging Tool for Tilt Windows (75-033). You can email me if you ... (cont.)