Viewing all customer Discussions for:

15-191 Heavy Duty Pivot Shoe, 1/2" Thick

Hello , I'm looking for this parts is something you can help me with? Thank You!

Hi - I'm trying to find this pivot lock shoe replacement part for my window. The sticker on the window says 'window series 4250 SH' and then says 'H-R30-48x77'. Can you please help me locate the correct part to replace? Thanks!

Good Morning We are searching for a brake shoe with the corresponding balancer for it. the weight of the sash is 30 pounds I have attached a photo of the brake shoe do you have in stock?

Hello..hope you can help. I need two of the pictured pivot shoes. I tried the 15-208 and it fit perfectly but didn't hold the window up. On closer inspection I noticed the sides have teeth like grabbers. Please help me if you can. Thanks for your time -ed

I had a broken balance shoe. I removed the coil balance and shoe and need help identifying what replacement part(s) I need. Can I buy just a replacement shoe or do I need the whole assembly? The number 4 is embossed on the coil that was connected to balance shoe. Thanks for your help. ... (cont.)

Attached are photos of a balance used to replace the old coil type lift shown next to it. The balance is 33" x 9/16" x 9/16". The old shoe from the coil type lift is 1 1/4" x 17/32". The sash weight is 42 lbs. I had a couple of extra balances left by the manufacturer but I am not sure if they we ... (cont.)

Hello, these photos are from a Simonton window, I included a photo of a tag I could find. The window seems to be falling out of the bottom sash when tilted in. Also a plastic cover located higher is busted. Can you please advise what parts I need to order to fix this issue?

Hi, Some of my window coil balance covers are broken, the spring exposed and the assembly seems blocked the tilt latch, so I can't move the sash up all the way without un-latch the sash. The thickness of the balance (I have ordered one from you, 9/16") seems need one less than 1/2". Any suggestions? ... (cont.)

The only marking I can find is the number 9 stamped on the two coil springs. Thankyou

What type of window would require a balance like this, and where can i find these?

My windows is Simmonton Dimension One series that is installed on 1997. I need to replace the whole balance assembly and latches for my windows. The stamp on the coil is 5.5 64" pat523208

I have Simonton single hung, double pane windows that are 20 years old. Two have broken coils, 1 is approximately 34x70 and the other approximately 34X58. I have attached pictures of the window labels for each, the broken coils on each and the good coil on the larger one. There are no markings on ... (cont.)

Part numbers on balance housing: Inner facing surface 5.365.638, outer surface 5.232.208 Window is 9 yrs old. Thanks!

Sir, attached are two pictures of the balancer in what I suspect is an Atrium Double hung tilt window. These windows are installed in a USDA Rural Property operated by the Housing Authority of the City of Pekin. Thank you for your assistance. Michael

I need to replace these balances. Any info on ordering these parts?

please, see parts in the attached image

The windows were manufactured by Greaf. Not quite sure how to get the coils out, do I have put a cut in the back side of the track?

howdy! What product would you recommend to replace the following? The number on the spring looks like 9.0 or 0.9, possibly 0.0 and is 1/2 inch, The sash is about 24 x 30

Hello, Need help understanding coil balances. First question. I have a single hung window, sash weight is 19 lbs. Both left and right coil balances are broken. Should I purchase the 10 lbs. left and right? It says it can hold a window 19-20.99 lbs.? 10-lb-Single/pd/Series-140-Quic ... (cont.)

Our Owens Corning Windows were installed in 2000. We need to replace the Sash Support Balance Coils and Hardware. Can you help us identify / locate these parts?