Viewing all customer Discussions for:

39-336 Universal Joint With Pole Ring, 11/32"

Hello - just want to make sure I am ordering the correct parts. I would like to install the 39-336 universal joint with pole ring so that I can open and shut window from many feet below with a pole. My question involves the 39-157 4 inch crank extension. I assume that one end be inserted into the wi ... (cont.)

I have a Jeld Wen awning window located 14 feet above the floor. I need a gear box to redirect the spindle for the crank handle to a downward orientation so I can use a pole handle to open and close the window. Can you help?

I am looking for a swivell (pole ring) on window to open SKY Light.

I bought your Skylight Operator, Angle Drive 39-379 to replace a broken operator and it works fine -- but my Hex Ball pool doesn't work because the operators are about 11 feet high and the Hex Ball won't make a good connection even though it reaches the operator handle, the Hex Ball won't slip in be ... (cont.)

What is the difference between the eyelet adapter and universal joint with pole ring?I have a n extension pole with hook and I need an adapter for window crank to be able to open and close window skylight

I have a skylight in my apartment and, unfortunately, it is missing a handle. I have already purchased product #39-336 and a telescope handle, which I thought would be sufficient to make this work. I now found that the universal joint (39-336) does not connect with the piece sticking out of th ... (cont.)

Can we buy this part in Bronze? Universal Joint With Pole Ring, 11/32" Product Code: 39-336 We would need five of them and a telescopic pole.

I want to purchase universal joint with pole ring and the extension pole. The handle on the windows is a Truth with the numeral 3 under the name. The handle hole does not look like the ones on the site. It is round except on one side on the circle with a notched straight cut out. It measures 11/3 ... (cont.)

Hi, I have purchased parts for a rental we have in PA form you all before. We had two casement windows installed and the company didn't complete the job of adding the proper hardware or providing a pole to be able to crank them open. The window's are about 15' up. I am a DIYer for the most pa ... (cont.)

I am trying to understand the Truth Hardware Universal Joint in detail. If you can please help me with the following questions or if you have documentation, it would be most appreciative: 1. Is there an alternative/competitors to the Truth Hardware Universal Joint for Skylights or is it paten ... (cont.)

I need a replacement eyelet for a skylight. Its a 5/16th diameter with 12 splines. Also, the set screw is situated lower on the eyelet....close to the opening. Do u sell those please ?

Will this work for my Integrity casements? If not , what parts will I need. Thanks

Hi ... I have 3 small custom Jeld-wen clerestory windows that I would like to reach (open and close) with a pole. I need an articulated connection because the window crank splines point up and windows are 10" from the floor. The cranks that came with the windows are : TRUTH 40984 which seems to ... (cont.)

Hello, I am looking for the parts that would let me connect the pole shown in picture 1 and the Skylight Operator, Angle Drive in picture 2. I have been trying to do that for years. It would be great if you had some ideas. Regards, Yves

Looking to see if you might have weather shield Window Crank Handle - aluminum finish with grayish plastic end. Weathershield 45001

I am hoping to use this system on Milgard awning and casement windows located about 10 feet above the finished floor. Milgard cannot give me any drawings or details of the size/shape of their crank, but are sending a sample to my dealer-supplier for us to measure. Can you give me some info on your h ... (cont.)

Will this work on international and Milguard awing windows?

All indications are that my operator is a Roto, but almost all documentation I find on the internet shows a "hex" stud, or receptical. The stud coming out of my operator is definately splined and measured approximately .32" diameter with a dial caliper. Will this 39-336 fit do you think? ... (cont.)

Will the 39-078 loop work with my Truth brand awning window cranks?

do you sell the crank that goes with the Product Code: 39-078 Universal Joint with Pole Eye?