Viewing all customer Discussions for:

39-336 Universal Joint With Pole Ring, 11/32"

Hi I have a 2 story front room with I believe folding truth handles in the 2nd story casement windows. Those are out of reach but I still want to open them. I have a telescoping pole that I could add an attachment to but wasn't sure if there was a better setup or if you could point me towards the at ... (cont.)

Good morning,I would like to replace the current cranks shown in pictures with new cranks. The current brand is Loewen and were electric windows. We are going away from the electric windows and going back to hand cranking them. The only problem is that these windows are 12 feet off the ground so I n ... (cont.)

I have a clerestory awning window made by Milgard The crank was modified to put on the hex head as in the photo I've also included a picture of the head of the operating pole It's almost impossible to get the pole cap to fit on the hex crank and I want t different system/configuration I found t ... (cont.)

Looking to replace an old jalousie (louvered) window with a new Tafco window that has a tee handle to operate. The window is high up and I need something like this to be able to open the window. Will this work with a jalousie style operator?

Hi, I am working on a project that will include awning windows set at a height that would require a ladder to operate them. Motorized versions are available but not necessarily in the budget. Would your universal joint/ring work for this application in place of the operating handle? Or do you have a ... (cont.)

Was about to buy qty=5 of Universal Joint With Pole Ring, 11/32", 39-336, bronze. Well, 11/32 =.34375, which is slightly greater than the presumed 1982 Truth brand crank spindle i want to put the 39-336 onto. I measured at three points (rod, gear, inner rod) = (0.336, 0.311,0.25). I don't know tha ... (cont.)

Following kitchen renovation, the window on the pictures will become too far to reach the crank, so I wanted to replace the crank by an eyelid (bronze) Would part 39-336 be sufficient, or do you think I would need more to set it up? Do you recommend other configuration (knowing the access will be h ... (cont.)

Hello,Following kitchen renovation, the window on the pictures will become too far to reach the crank, so I wanted to replace the crank by an eyelid (bronze)Would part 39-336 be sufficient, or do you think I would need more to set it up? Do you recommend other configuration (knowing the access will ... (cont.)

I can't see any brand anywhere on the thing, but it has a place for a splined attachment to be connected. I would like to purchase an eyelet adapter, but I'm not sure of the size of the spline part. It looks to me like there might be more than one standard size for these things, 11/32 and something ... (cont.)

Prior to purchasing three of your skylight operators(39-379) with eyelet adapters 39-247. I need to know what type of an opening if any, there is in the metal hook (39-214). I have a 3/8 solid rod cranking pole I can adapt to most anything. Just easier knowing whats available.

I am trying to find a universal replacement hook for a skylight that uses this type of hook end on the pole. It also attaches to the crank spline of the skyl;ight opening mechanism as this (in your picture) attaches to the pole. Thank you, Ernie

What is the length? And material of this product? Is it a problem purchasing and shipping from Canada to the US? Thank you, Joyce

Hello, Looking for the correct pole opener loop attachment for the spline "pictured" for my pre 2000 Roto Skylight. The actual opener is stamped Roto "pictured", I believe the "True" attachment with the loop will fit, just want to make sure. Looking to purchase 2 attachments and the correspondi ... (cont.)

Will Product Code: 39-336 fit my jeld wen awning window? I have awning windows 10' and have lost one of the 'cranks' which is jointed with a pole ring. thank you for your time and consideration

Hello. I have awning windows installed high in my livingroom with 2x8 stud walls. The depth of the walls means I need an extension from the crank pinion on my window to the edge of the sill so I can open them with a pole. It appears as though you produce such hardware. What details do you need to id ... (cont.)

Hello, I moved into my home during the winter and in Spring, discovered the previous owners took the skylight eyelet. I have no idea who the manufacturer is (I've looked all over the frame and glass). I measured the spline, I believe its called, and it is 5/16th. The pole they left behind has ... (cont.)

Hi I need the universal joint for a pole ring for some Anderson awning windows. The house is from the mid 1980's. I hoped the 11/32 39-336 would work but it's inside diameter is to small. Do you sell something that will fit the post on the windows I have. Need to stand on floor and use a pole to op ... (cont.)

Hi, I

These are certainteed windows. I have three windows that need the shown. I trolled arm attachment that can be used with a telescoping pole adjuster.

1. I have a Schwinco hurricane window I cannot reach the operator to open or close the window. The operator shaft is 5/16" in diameter and has 12 splines. Do you have a universal joint with a pole ring that will fit on this operator shaft? 2. If so, I need a straight four foot extension pole wi ... (cont.)