Viewing all customer Discussions for:

82-055K Keyed Handle Set, Acorn

I have a door with Trimview lock like your 82-262. Need to replace it with a keyed lock. The keyed version of this lock is discontinued. It looks like 82-055K would fit as a replacement. What do you recommend ?

I replaced the existing handle with this keyed version. The sliding door locks properly from the outside, but removing the key unlocks it. Obviously I installed it improperly. Any ideas what I did wrong?

My AconDorwal handle has broken near the screw. My door slides left to right so the handle is on the left side of the slider. I purchased a replacement but I think it was for a door that slides right to,left. Can you help me find the correct replacement ?

Attached are photos of current patio door handle parts + manufacturer label on door itself. The bolts are 3.5" on center and door is 1.5" wide. Will the 82-055K kit work for me to have exterior keyed ability to lock patio door?

We have an old sliding glass door with a Dorwal handle. The door and locking mechanism still work fine, but we'd like to install an exterior key lock. The current exterior portion looks like it could have had a key lock included, but the round area where the key would go is solid. Do you have a r ... (cont.)

I recently purchased item #82-086 but need a latch assembly that works with it... I have attached two photos of what we have now but looking for the ability to key lock it from the outside ...all that is there now is just the latch Thank you

Our slider door lock is the original installed when the house was built (1985). Stamping on it says "ACORN WAL" Handle mounting screws 3 1/2 in. apart. Door is 1" thick. Catch on door jamb mounting holes 13/16 in. apart. We would like to replace the assembly with a new one. First choice, a key ... (cont.)

Hi this handle is from an Anderson's slider patio door that is 20+ yrs old. I need a replacement. It has a lock from the inside but not from the outside

The handle is broken but the door is still good. It is an inside door handle. The screw holes are 3 1/2 inches apart. Do you have a handle to match?

Hi i would like know if guys have a replacement handle kit or a update version for my door i have the one showed in the pictures it looks like is missing everything on including the lock Keeper i know is probably old but if there anything you have the might work I would really appreciate thank you ... (cont.)

Are these acorn lock cylinders rekeyable?

Do you have a video on how to use the 82-055K patio lock set? Just bought from you and installed ...having extremely hard time unlocking it.

My lock thingy (technical jargon) broke. I would like to purchase some replacement hardware. The screw holes are 3.5 inches on center, the big hole (more technical jargon) is .75 inches in diameter, and the door is 1.25 inches thick. What do you have as a replacement?Thanks,Mike

I am looking for a replacement handle with lock for a 6' Acorn insulated aluminum sliding glass door. The face plate is silver metal with a wood handle, the door was purchased in 1978 and is anodized alum. frame.

I recently purchased the replacement handle with keyed option for the acorn dorwal patio door. After installing the handle the keyed portion of the handle is very tight to the jam making it almost non functional. I have installed many of the 82-055 with no issue but as soon as the 82-055K is install ... (cont.)

Hi, I'm replacing an old Acorn handle. I received an 82-055K, there is a plastic piece in the package. What is that used for? Also, what holds the key cylinder in place, I'm assuming when it's screwed together the latching mechanism will push against it keeping it tight in the hole on the outside h ... (cont.)

Im looking for 10 pairs of these rollers.

tumbler lock broken. Looking for a new locking door handle and associated mechanism

Door handle broke at top screw hole.

Here is a picture of the inside part of the patio door handle assembly. It should go with the email I just sent a few minutes ago.Think it is Acorn Sliding Door Handle Set, 3-1/2"holes appear to be 3.5" apartThe interior metal portion of the lock has L120 on itThe metal handle has P.N.L. 103Am I ... (cont.)