Viewing all customer Discussions for:

15-192 CertainTeed Pivot Shoe

Have a broken shoe. Sticker on window Showing information but can't find replacement part

Need balances for both sides of upper and lower windows. Spring is marked 406. Also need the brackets that attached to the lower window that fit into the cams. There is still a part on the springs but the cams and the other plastic piece that fits around the cams have all fallen down the window tra ... (cont.)

I did not see any numbers on the coil for reference.

This broke from the window. It is a certainteed window.

One side of the balance/coil broke. What parts do we need to replace this so the window will stay up when we open it? Thanks.

5500 series with low ESE no grid windows. 15 years ago installed by local dealer. The sliders on both top and bottom windows are broken. We cannot open either window because they fall out. Sorry it took so long to get back to you but I had to wait for someone to hold the windows while I took the pi ... (cont.)

Need window balances for certainteed single hung vinyl windows. Made in 4/2005 number on balances is 48637MXX sash is 30" tall by 32" wide and weighs 18.2 lbs. see pictures.

Hello, I am trying to locate some replacement parts for Simonton Vinyl double hung windows. A lot of the cam bars have broken so I may as well replace the other parts since I have to take the windows out right??

Images are from a good window of similar size. The Certainteed pivot shoe broke off the spring in the track. I have sash in place by only the lock. I need assistance identify the correct part(s) to order. These windows were installed in Spring 2000.

Hello, We are looking for a coil spring and metal connecting rod for a kitchen window . We think the window is a Simonton, but we are not sure. The window was installed by Sears in 2003. The number stamped on the coil is 409. Actually we would need a set of parts for each side of the window, si ... (cont.)

I've lubricated the tack and the part of the window that pivots, but the window still exhibits a great deal of tension when opening and closing the window. Is the part I need the one in the picture I submitted? And if so, can you direct me to the replacement part I'll need?

I have a Simonton double-hung window that is about 12 years old in my home. I need one RH dual-coil balance with the sash carrier, but I don't know what weight. I also need two pivot bars. Do I need to weigh my window to get the correct balance?

Coil and coil holder. Or complete assy.

I have a couple of balance assemblies going bad and would like to purchase repair parts before I remove the balance assemblies. I have the double hung windows. I have included the photos of the window data. Thank you for your help.Russ

Need shoe and balance - not sure of the part numbers but here's a pic of the window sticker

Pivot shoe and coil balance for Simonton window. Have included pictures.

Number on spring 4075

Hello, Window would not close all the way and found these parts in the side rails. What do I need and how do I replace these parts? Also the plastic lock piece came apart. Super glue it? Please help

The item is from an RSVP window. No identifying markings or numbers on the part. Once identified, I will be purchasing approximately 18 pairs for my house. Please help.

Went to open the windows and my upper window fell hard and want to know what the part numbers are. Please help.