Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

I am needing to find a replacement for this. It is a 26'' window balance. The ones I previously ordered had the wrong size end. It was too large.

I need 2 of these. thank you

What do I need to order for replacements and the latch on the spring fits in a hole drilled in the sash.

Attached are 5 pictures showing my current latch. The latch is slightly bent due to the failure of the t-lock shoe, resulting in the release of the channel balance which then was restrained by the latch causing the bend.I determined the shoe to be 15-194.I have reviewed all the 2-5/8 latches of sim ... (cont.)

Need to replace the window pivot shoes for 20 windows. The current one is 1" and has a green insert piece. There are three sets of numbers on the back side AT 67900, 4610108, 0467479. See attached pictures.

I need several channel Balances. I do not see any with the hook type like I have. Would you be able to help me figure out what part I will need. The only number stamped are "26B BS1". I have 11 windows needing repaired. Thank you for your help!

I have checked numerous windows in my house and I have come to the conclusion that I need the following parts to replace my broken ones 26-243 Left Latch (x7) 26-244 Right Latch (x7) 26-360 Pivot Bar (x4) 15-194 Balance Shoe (x24) S795-34C Window Balance (x2) but I am going to need the 15-194 balan ... (cont.)

I need tilt out balances. These are marked 26CBSItl. They are 26" and very similar to your s795 but it has a 1" cam similar to your 15-194. I need 4 of these balances.

Hi - I need help with ordering replacement balances for 2 different size windows that seem to be manufactured by a company called MW ( I will send pic of logo)- they were provided in a modular home I built in 2006. in both windows one side of the window balances is broken inside- I have pics with t ... (cont.)

Dear SWISCO, Is there a SWISCO store in Houston please? I need to buy some tilt latch, balance and shoes after checking if they match with my windows.Thank you very much for your reply. I see the labels on the parts as below. Tilt latch: L. My measurement is 2.5/8" x 12/16" x 3/8" T-lock, balan ... (cont.)

The part that broke for me is the twist lock shoe. I would like to buy 2 shoes but would consider buying sash balances if the sash balance is the only way to get the twist lock shoes. This is from a Pella impervia window. I tried to show the number stamped on the sash balance.

I am look to order some of your Series 795 Balances with 15-198 hooks and a 15-194 bottom shoe. Here are the stamps and quantities I am requesting: 22B - 8 26C - 8 28C - 4 30B - 4 30C - 4 36C - 12 Also, can you please recommend a replacement for the pivot bar and the tilt latches pictured above. ... (cont.)

BSI 26C are the only numbers and not sure what brand of window.

Need Balance part at base of balance for Pella Single Hung Window. Balance is stamped 26C BS1 26 inch balance length

Need to order 4 balances for tilt windows - 28" with Pivot Lock shoe and 2 1/2" pivot bar. The original balances are eroded due to salt water - attached is a picture of the pieces of the pivot shoe to better identify the parts. Thanks in advance

hello. this boot is broken and the balancer isn't strong enough to hold up the window. i would like to replace both balancers and boots for the left and right sides of my single hung window thanks

My windows are 10 years old, and tilt open. Balance shoe tips are breaking, need to be replaced. The part is grey, with a green insert. Markings are: Pat. OS 6.679.000, 4.610.108, D467.490Please advise proper part to make sure I am getting part I need before I order. Thank you.Anthony ... (cont.)

Hi, I am looking for replacement for this part. I need 8 of them. I was told that they are 62-50006 pivot window tilt shoes. I am not sure if that is correct or not.

Hi. I have reviewed your CB parts and believe the S795-36 to be the correct part based on the 2 pictures I have attached. Could you please confirm this is the correct part? https://www.swisco.com/36-inch-series-795-sash-support-system/pd/Series-795-Channel-Balances/S795-36

Looking for one window balance top has a clip that goes in hole at top of window bottom shoe measures 1 inch. Stamped on face 28C Greg